hello . i have one question ..  how can i clone dsg mechatronic ? i have read/write tools  but the hw numbers are not the same .

this is the original mechatronic info Control Module Part Number: 02E 300 013 B
  Component and/or Version: GSG DSG AG6     511 2103
           Software Coding: 0000020
            Work Shop Code: WSC 05311
                      VCID: 102F56CB0396A89E043-8045

Advanced Identification
     Serial number: 00001001110066
     Identification: TFK-030
     Revision:    51112
     Date: 11.01.10
     Test stand number: 8502
     Manufacturer number: 0066
Flash Status
     Programming Attempts: 3
     Successful Attempts: 3
     Programming Status: 00000000
     Required Conditions: 00000000
     Flash Tool Code: 08256 386 01286
     Flash Date: 24.14.02
Software
     0001           
Misc.
     Hardware number: 02E 927 770 AL
     Lot Number: F10
     Type Lock: 0003

and this i want to use on my car
                Address 02: Auto Trans
Control Module Part Number: 02E 300 050 C
  Component and/or Version: GSG DSG         070 1403
           Software Coding: 0000020
            Work Shop Code: WSC 44551
                      VCID: 122B5CC30E9A5A8E327-5072

Advanced Identification
     Serial number: 00000609180573
     Identification: TFK-030
     Revision: 04507000
     Date: 18.09.06
     Test stand number: 8501
     Manufacturer number: 0573
Flash Status
     Programming Attempts: 3
     Successful Attempts: 3
     Programming Status: 00000000
     Required Conditions: 00000000
     Flash Tool Code: 163324 143 68721
     Flash Date: 00.00.00
Software
     000D           
Misc.
     Hardware number: 02E 927 770 AE
     Lot Number: C30
     Type Lock: 0001

thanks in advance !

I think you "old" mechatronic is already a exchange part. It´s a F10 version which was the tricore based version to exchange powerpc hardware. So this is a very special software which was never installed from factory. Maybe you can use a newer Fxx mechatronic and write full backup from your F10 to it. E.g. with Magicmotorsport or PCMflash

Other chance is to find correct software for your C30 mechatronic which fit to your car / engine.