Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
Importing Damos in WinOLS ( Map's could not be read )
Pages: [
1
]
« previous
next »
Author
Topic: Importing Damos in WinOLS ( Map's could not be read ) (Read 5016 times)
Maxohio
Full Member
Karma: +3/-3
Offline
Posts: 83
Importing Damos in WinOLS ( Map's could not be read )
« on: March 03, 2020, 03:09:30 PM »
Importing Damos in WinOLS ( Map's could not be read )
Currently i'm trying to import an a2l file using WinOLS. The way i'm importing the file is: Project -> Ex & Import -> Import Damos & A2L
After importing, its recognizes the maps, but shows the following error. Am i doing something wrong?
Greetings!
Logged
prj
Hero Member
Karma: +1058/-464
Offline
Posts: 5952
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #1 on: March 03, 2020, 03:21:22 PM »
Yes, you are importing an a2l that does not match your binary, or you are importing it with the wrong offset.
That said - you know, EVC support is pretty good if you ask them.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
Maxohio
Full Member
Karma: +3/-3
Offline
Posts: 83
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #2 on: March 03, 2020, 03:31:44 PM »
I dont think they give support on pirates.
The a2l should match the bin, how can i determine what offset to use?
Logged
prj
Hero Member
Karma: +1058/-464
Offline
Posts: 5952
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #3 on: March 03, 2020, 04:03:56 PM »
The paid version determines the offset pretty well on it's own.
I haven't used cracked in something like 7 or 8 years...
But you can determine the offset by looking inside the a2l manually, looking at your binary and seeing where things are addressed and where things are.
On C166 variants the extflash where the calibration is, is usually loaded at 0x800000, so that is a good start. But you can see all that from the a2l.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
Maxohio
Full Member
Karma: +3/-3
Offline
Posts: 83
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #4 on: March 04, 2020, 12:08:44 PM »
Thanks i've found the solution!
Logged
Bitshifter
Full Member
Karma: +10/-7
Offline
Posts: 94
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #5 on: March 04, 2020, 03:25:15 PM »
Quote from: Maxohio on March 04, 2020, 12:08:44 PM
Thanks i've found the solution!
Maybe it coud be helpful for other beginners, if you post your solution.
Remember: you asked for help at the beginning of this theard.
Logged
fknbrkn
Hero Member
Karma: +183/-21
Offline
Posts: 1427
mk4 1.8T AUM
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #6 on: March 04, 2020, 03:36:24 PM »
i bet its a manual offset 800000
Logged
Maxohio
Full Member
Karma: +3/-3
Offline
Posts: 83
Re: Importing Damos in WinOLS ( Map's could not be read )
« Reply #7 on: March 05, 2020, 11:03:07 AM »
You're right
using an offset of 800000 cleared the problem.
«
Last Edit: March 05, 2020, 11:35:36 AM by Maxohio
»
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
September 24, 2024, 11:51:46 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...