Pages: [1]
Author Topic: MPPS 0.00 Voltage  (Read 4231 times)
AidanT1120
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 6


« on: March 23, 2020, 07:51:17 PM »

Hello, I have a V13+ K+CAN MPPS Cable that I received today and when I plugged it into the car and then my computer I turned on the ignition, (didn't start the engine) at the bottom it reads 0.00 volts and I had an external battery connected up to the car. Anyone know why or can help me fix this issue?
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #1 on: March 25, 2020, 06:20:51 AM »

shitty clone, drivers not installed right, administrative rights needed for the program to run as it should, etc. if you need to ask questions like this you really shouldnt be trying to tune your car
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
rego88
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 12


« Reply #2 on: May 03, 2020, 02:44:27 PM »

the problem isn t a driver..... why if incorrect driver the software don't start
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #3 on: June 01, 2020, 12:03:26 PM »

the problem isn t a driver..... why if incorrect driver the software don't start

The Driver for the china clones is specific to the MPPS version your using.

The clones are now onto v22 btw... or get an 18 and upgrade it to v22...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0s, 0q)