Pages: [1]
Author Topic: me7.5 immo issues after bin swap  (Read 4398 times)
1mouse3
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: March 25, 2020, 12:40:43 PM »

Hi I have a 04 b5.5 passat with a 1.8t awm and 8E0909018A ecu, it had a 4B0906018DP 0261208291 bin and swaped to a 4B0906018DH 0261207928 bin off a 03. I wrote the bin over with Galletto in boot mode and get the same error going back to the orginal bin. Im getting a P1570 Engine Start Blocked by Immobilizer code and was wondering what should I do to fix this issue, I have a KKL FTDI FT232RL based cable.In the ross-tech wiki I see there is some pin for the ecu that I think should had been garbed but hind sight is 20/20. Yes I know Im playing with fire and now need to find the fire extinguisher.

http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_ECU_Swapping
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #1 on: March 25, 2020, 02:40:50 PM »

first off thats a awt euro software version
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
1mouse3
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #2 on: March 25, 2020, 02:52:11 PM »

This pin that is stated in the wiki is the SKC and this softwhere works to get the eeprom.bin, in hex edit its 33 32 in that order. If immo has you locked out you cant get the bin over obd and have to for boot mode. You will be locked out for boot mode if you dont go pulling fuses like 3 cluster and a radio fuse, dont know which are required. So got the immo resolved but know have issues with Control Module Programming Not Finished P1681.

http://nefariousmotorsports.com/forum/index.php?topic=1168.0
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #3 on: March 25, 2020, 02:53:52 PM »

here write this i immo offed it in flash its passat 018dn has the same offsets as the b6 a4 518ak file so you can use that definition file to edit yours
« Last Edit: March 25, 2020, 04:56:48 PM by Marty » Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
1mouse3
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #4 on: March 25, 2020, 02:54:42 PM »

Yes I know its for euro 1.8t awt but that was a bin was finding that there is a map to, so am going to see what happens.
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #5 on: March 25, 2020, 02:58:13 PM »

here is with Control Module Programming Not Finished patch fixed and immo off in flash
« Last Edit: March 25, 2020, 04:57:07 PM by Marty » Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
1mouse3
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #6 on: March 25, 2020, 03:00:26 PM »

here write this i immo offed it in flash its passat 018dn has the same offsets as the b6 a4 518ak file so you can use that definition file to edit yours

thanks
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #7 on: March 25, 2020, 03:01:00 PM »

heres a matching map pack for it
« Last Edit: March 25, 2020, 05:00:56 PM by Marty » Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
1mouse3
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #8 on: March 25, 2020, 03:30:16 PM »

Thanks for the tip that the 018dn has the same offsets as the 518ak. Found a differnt map that has the ESKONF, MSLUB, MSLBAS and SRY* Im looking for.

http://nefariousmotorsports.com/forum/index.php?topic=13364.0
Logged
1mouse3
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #9 on: March 25, 2020, 03:45:21 PM »

that bin flashed without issues and the car starts, thanks again.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0s, 0q)