Pages: [1]
Author Topic: ME7.1.1G Immo off check  (Read 2977 times)
Dave9n3
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 284


« on: March 31, 2020, 02:21:43 PM »

Hi,

Please could someone kindly look over these two files to check immo off is done correctly ME7.1.1G ECU.

I have manually calculated CS but not sure if i need to 'set' backup pages. Is eeprom checksum essential?

IC is 95P08
« Last Edit: March 31, 2020, 02:30:41 PM by Dave9n3 » Logged
Dave9n3
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 284


« Reply #1 on: March 31, 2020, 02:32:05 PM »

Sorry - please see the attached. This is the one I believe to be correct.

Would appreciate someone else's view on this. thanks in advance.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #2 on: April 01, 2020, 05:58:57 AM »

Sorry - please see the attached. This is the one I believe to be correct.

Would appreciate someone else's view on this. thanks in advance.

cksum is the same as on me7.5 ...

Calculate the stock cksum values and see if you got that right. Remember to add the line number after line 1 and negate the sum.
Logged
Dave9n3
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 284


« Reply #3 on: April 04, 2020, 07:53:43 AM »

Update

E2P worked to turn immobiliser off. Hopefully this can be useful for someone else in future.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.225 seconds with 17 queries. (Pretty URLs adds 0s, 0q)