Pages: [1] 2
Author Topic: S4 B5 8D0907551D KFNWEGM and CWSAWE  (Read 8806 times)
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« on: April 02, 2020, 10:58:32 AM »

Hello, i want to play a bit with an overrun in my 2.7. It has 8D0907551D ecu with a custom remap, so this is a reason why i can't flash other, for example 8D0907551M file. I have KFZWOP, KFZWMN and KFTVSA, however i also need KFNWEGM and CWSAWE. I can't find them. Can anybody help me with looking for the right address of these maps? I upload my Bin file, stock 8D0907551D and the best xdf that i've found.   Thank you in advance.
« Last Edit: April 02, 2020, 01:26:52 PM by kubawd » Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #1 on: April 02, 2020, 11:45:43 AM »

ktvsa starts at 19828

KFEGM is 19800




There is more complete files on this forum that are vastly more complete and compatible for crossflashing however.. But good on you for blazing a trail.

I have compared this against my own 018ch and the 551k rs4 file to correlate and cross check these findings
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-167
Offline Offline

Posts: 12235


WWW
« Reply #2 on: April 02, 2020, 11:46:18 AM »

Do not mod other peoples files.

I have written literally dozens of posts why.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #3 on: April 02, 2020, 12:03:39 PM »

I take it thats in regards to the first bin that OP has posted. I missed that and just went off the stock one and found what I know.
Logged
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #4 on: April 02, 2020, 01:07:27 PM »

I'm not planning to modify any other important maps, I already did this mod in many 1.8t files, however it was easier to localize the CWSAWE and KFNWEGM. I found ready xdfs or the adresses i needed in similar 1.8t files. This time it's not that easy, because it seems that adresses differ between every 2.7t file. But i get the point, I also deleted the modified bin.
« Last Edit: April 02, 2020, 01:27:15 PM by kubawd » Logged
rogerius
Full Member
***

Karma: +61/-6
Offline Offline

Posts: 114


« Reply #5 on: April 03, 2020, 02:47:48 AM »

I'm not planning to modify any other important maps, I already did this mod in many 1.8t files, however it was easier to localize the CWSAWE and KFNWEGM. I found ready xdfs or the adresses i needed in similar 1.8t files. This time it's not that easy, because it seems that adresses differ between every 2.7t file. But i get the point, I also deleted the modified bin.
cwsawe 0x153D6
Logged
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #6 on: April 03, 2020, 04:28:48 AM »

Thank you guys, im gonna test these values. Does anyone know addresses of KFNWEGM X and Y Axis?
Logged
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #7 on: April 03, 2020, 06:39:45 AM »

I've checked these adresses in TunerPro and it seems that CWSAWE is at 0x153D5 or 0x153D6, as you said. KFTVSA is at 19860, KFNWEGM seems to start at 19838. Im gonna flash the map and see if it works Smiley
Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #8 on: April 03, 2020, 03:44:25 PM »

That’s Wierd you get Differant addresses as I went off your file. I do know if you look for them
In hex dumps the patterns are easy to see. Kfegm comes before kvtsa
Logged
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #9 on: April 04, 2020, 07:03:27 PM »

Well, it didn't work with what i've done. Something must be wrong with adresses. I'm gonna check them once again.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-167
Offline Offline

Posts: 12235


WWW
« Reply #10 on: April 04, 2020, 07:29:36 PM »

Reflash to M or K or F and call it a day
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #11 on: April 04, 2020, 07:32:30 PM »

I would have to copy the whole map, which may not be that easy. It's a tuned k04 rs6 hybrid setup.
Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #12 on: April 04, 2020, 08:18:35 PM »

Where the addresses that I posted wrong? Because there was a discrepancy between my addresses and what you reported.

I crossed it between 3 differant bins and all of them structured the same way. I am almost positive the maps are right, the axis could give or take
Logged
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #13 on: April 04, 2020, 09:31:37 PM »

I will post screenshots of KFNWEGM, CWSAWE and KFTVSA that i've found in 551D(shown in TunerPro, comparing to 551M(shown in WinOLS). Can somebody please look at it and tell me if it's right?
Logged
kubawd
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 37


« Reply #14 on: April 05, 2020, 01:54:58 AM »

Okay, now i get what is wrong. My ECU is 8D0907551D, however it seems to have some addresses moved by a space or a few. I can't match it with any other xdf file or bin, 8d0907551d are very close, matching most of the maps. for example in 551d CWSAWE is at 153D6, while in my its on 153D5( its right after the ecu name, which was changed by my tuner into his brand name). KFNWEGM is at 19838, instead of 19800, KFTVSA is at 19860 instead of 19828. I will attach my file and 2 other 551d bins here... I also attach earlier xdf with some addresses added. Maybe someone will come up with an idead what's going on here.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)