Pages: [1]
Author Topic: Help with IMMO off MED9.1.1 95160  (Read 928 times)
IVANVXR
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 22


« on: April 04, 2020, 11:46:56 AM »

Hi guys, can someone help me with immo of for ST95160
I would like to pay
ECU is MED9.1.1 3.2 FSI
I was try two solutions but no positive.
I was read full BDM with ORI KTAG

Thanks
Logged
elektronik13
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 56


« Reply #1 on: April 13, 2020, 11:11:17 AM »

Hi guys, can someone help me with immo of for ST95160
I would like to pay
ECU is MED9.1.1 3.2 FSI
I was try two solutions but no positive.
I was read full BDM with ORI KTAG

Thanks
immo off
Logged
IVANVXR
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 22


« Reply #2 on: April 13, 2020, 11:48:44 AM »

immo off

Hello,thanks for helping.
I was try same solution from E2PA but don't working
Logged
Hollywood
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 55


« Reply #3 on: October 12, 2020, 03:37:45 PM »

Is this a working method for S5? - unclear if this worked when tested..
Logged
elektronik13
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 56


« Reply #4 on: October 12, 2020, 04:12:12 PM »

Hello,thanks for helping.
I was try same solution from E2PA but don't working
it has to work, you won't get a better solution

Is this a working method for S5? - unclear if this worked when tested..

I think for at least 5 million people worldwide
this solution worked
but there are many cases where immo off does not work
due to poor diagnosis, the problem was not immo
« Last Edit: October 12, 2020, 04:25:04 PM by elektronik13 » Logged
bamofo
Full Member
***

Karma: +20/-0
Offline Offline

Posts: 243


« Reply #5 on: October 21, 2020, 10:28:10 AM »

Is this a working method for S5? - unclear if this worked when tested..

The S5 EEproms that ive seen are different then the one shared in this thread they have the initial large CSM portions 3 times instead of 2. if you use the E2PA tool it screws up the CSM on it all. Easier to manually turn off the IMMO and recalculate the CSM by hand.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)