Pages: [1]
Author Topic: MK5 golf gti dsg. bigger inlet - check over.  (Read 2583 times)
Gottatune
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 4


« on: April 10, 2020, 06:52:53 AM »

Hello everyone I've been playing around with my stage 2 golf mk5 gti BWA - MED9

I have a few questions - how does my tune look as prespective ( also has launch control ) did try removing cold start but not managed that so well.

What is everyone using for logs?? I cant find anything at all on logging med9 ecu other then people wishing life was easy again with me7logger :')

Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: April 10, 2020, 09:18:58 AM »

Moved, since it doesn't have a log Sad

VCDS is almost sufficient for MED9 for most things.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Gottatune
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 4


« Reply #2 on: April 10, 2020, 09:26:18 AM »

That's fair enough, thanks for answering that. Ill have purchase another ross tech geunie cable or find a used one seeming my ex missus now cut all my cables up. Only just replaced my mpps and only have a vcds clone atm just so could read codes.
Logged
Josh_ox3
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 31


« Reply #3 on: April 17, 2020, 02:42:10 PM »

Hello everyone I've been playing around with my stage 2 golf mk5 gti BWA - MED9

I have a few questions - how does my tune look as prespective ( also has launch control ) did try removing cold start but not managed that so well.

What is everyone using for logs?? I cant find anything at all on logging med9 ecu other then people wishing life was easy again with me7logger :')



Did you log it with this setup?

Interesting to see the outcome
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)