Pages: [1]
Author Topic: m5.9 to m7.5 wiring pinout ?  (Read 6104 times)
xxx8indxxx
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 115


« on: April 04, 2012, 12:47:38 PM »

m5.9 to m7.5  wiring pinout ? anyone know where to start ? thankyou
Logged
gremlin
Hero Member
*****

Karma: +179/-7
Offline Offline

Posts: 568


« Reply #1 on: April 04, 2012, 04:17:58 PM »

m5.9 to m7.5  wiring pinout ? anyone know where to start ?

Start to learn about principial differencies beetween these ECUs.
Than will be clear that your question is unanswerable...

Logged
xxx8indxxx
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 115


« Reply #2 on: April 04, 2012, 04:59:30 PM »

well i need the pinouts for both ecu's to make adapter harness then i will have to get a few sensors and  i plan to use a dbc throttle body  i have a wideband oxygen sensors i can get all the sensors i need for free  so what i really need is the pinouts and a ecu file with dbc mod and immo delete im lost after that
Logged
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #3 on: April 05, 2012, 04:00:54 PM »

Its easier to just get the whole harness. Trust me.
Logged
xxx8indxxx
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 115


« Reply #4 on: April 05, 2012, 06:08:32 PM »

lol i plan to eliminate almost everything and run the bare minimum
Logged
Gonzo
Sr. Member
****

Karma: +20/-30
Offline Offline

Posts: 483


« Reply #5 on: April 07, 2012, 09:00:30 AM »

You can swap an engine harness in about an hour or two.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0s, 0q)