VW Passat VDO Dash problem

Pages: [1]

« previous next »

Author

Topic: VW Passat VDO Dash problem (Read 5040 times)

nicktruman

Newbie

Karma: +2/-0
Offline

Offline

Posts: 15

	VW Passat VDO Dash problem « on: April 16, 2020, 06:47:23 AM »

hi everyone.
i have fitted a 2002 20v 1.8t VW Passat engine and transaxle mid-mounted in my 1978 Triumph Spitfire, the engine now sits where the differential used to sit, thanks to this site we have disabled the immobilizer and are currently getting rid of the airpump, evap, 2nd o2 sensor etc..
I have used a immo3 VDO dash from a Passat for its gauges, and i have a problem. the dash is looking for the abs and is throwing a wobbly. The digital display shows a huge red STOP and i can't get rid of it.

any ideas how I can code out the abs and other modules that my car doesn't have?


« Last Edit: April 16, 2020, 07:20:59 AM by nicktruman »	Logged

nicktruman

Newbie

Karma: +2/-0
Offline

Offline

Posts: 15

	Re: VW Passat VDO Dash problem « Reply #1 on: April 16, 2020, 06:53:55 AM »

Quote from: nicktruman on April 16, 2020, 06:47:23 AM

These are the errors I am getting
VCDS-Lite Version: Release 1.2
Thursday, 16 April 2020, 13:29:08:0
Control Module Part Number: 3B0 920 929
Component and/or Version: KOMBI+WEGFAHRSP VDO V04
Software Coding: 04415
Work Shop Code: WSC 00000
VCID: E4BBAF936743
Additional Info: WVWZZZ3BZ5P015545 VWZ7Z0D9949179
9 Faults Found:
00771 - Fuel Level Sensor (G)
30-00 - Open or Short to Plus
00562 - Sensor for Oil Level/Temperature (G266)
30-00 - Open or Short to Plus
00779 - Outside Air Temp Sensor (G17)
30-00 - Open or Short to Plus
01128 - Immobilizer Pickup Coil (D2)
35-00 - -
01176 - Key
07-00 - Signal too Low
01177 - Engine Control Unit
64-10 - Not Currently Testable - Intermittent
01316 - ABS Control Module
49-00 - No Communications
01321 - Control Module for Airbags (J234)
49-00 - No Communications
01336 - Data Bus for Comfort System
49-00 - No Communications


« Last Edit: April 16, 2020, 07:25:35 AM by nicktruman »	Logged

cessnas

Full Member

Karma: +2/-17
Offline

Offline

Posts: 77

	Re: VW Passat VDO Dash problem « Reply #2 on: April 16, 2020, 02:07:35 PM »

If you want to remove it completely, go into CAN Gateway and subtract 00002 with VCDS


	Logged

cessnas

Full Member

Karma: +2/-17
Offline

Offline

Posts: 77

	Re: VW Passat VDO Dash problem « Reply #3 on: April 16, 2020, 02:13:45 PM »

If you want to remove airbags also remove 00004


	Logged

nicktruman

Newbie

Karma: +2/-0
Offline

Offline

Posts: 15

	Re: VW Passat VDO Dash problem « Reply #4 on: April 17, 2020, 01:00:47 PM »

Thank you Cessnas
are these recode options documented anywhere so I can remove all the rest of the audi stuff... just want to leave engine ECU, dash and sensors
cheers nick


	Logged

cessnas

Full Member

Karma: +2/-17
Offline

Offline

Posts: 77

	Re: VW Passat VDO Dash problem « Reply #5 on: April 18, 2020, 01:53:24 AM »

Pretty sure you can only remove ABS and Airbag on the 3BG chassis from the gateway module.
You can check ross tech's website for more info about coding the gateway module


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 02:12:55 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search