Pages: [1] 2
Author Topic: Smoke limit EDC16 VW Jetta 1.9TDi 2008 (BXE)  (Read 14775 times)
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: April 08, 2012, 06:16:59 AM »

I am trying to increase smoke limit, but no results.  Huh
18ab98,18ad76,18af54,1d69b4,1d6b92,1d6d70 - lambda based smoke limit map?
18a3f4,1d6210 - MAF smokemap?
192d28,192f6c,1931b0,1c6350,1c6594,1c67d8 - MAP smokemap?
I want to increase smoke limit to 330 nm, but now i have only about 280-290 below 3000rpm. (see log) WHY?
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #1 on: April 08, 2012, 12:27:43 PM »

most EDC16 usually have only lambda based smoke maps f(rpm,air load in mg). lowering these values will help but don't mess with the DPF/FAP
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #2 on: April 08, 2012, 02:10:07 PM »

take a serious look at: these four 13x16 maps:
1d69b4,1d6b92,1d6d70
and(!) 1d67d6
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #3 on: April 17, 2012, 09:58:11 PM »

1d67d6 what is it? lambda?
axes maf vs rpm?
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #4 on: April 18, 2012, 04:32:01 AM »

 lambda based smoke maps f(rpm,air load per cylinder in mg).
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #5 on: April 20, 2012, 10:19:29 PM »

take a serious look at: these four 13x16 maps:
1d69b4,1d6b92,1d6d70
and(!) 1d67d6
I`ve tryed to reduce these maps by 15%, but no results (
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #6 on: April 21, 2012, 03:29:36 AM »

probably you run into other limiters?!
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #7 on: April 22, 2012, 03:47:02 AM »

probably you run into other limiters?!
No. It is smoke limit. See the log.
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #8 on: April 22, 2012, 05:42:21 AM »

wow, I wish I ever had this details of logging when doing BMW diesel.... Wink

Indeed it looks like smoke map limits.
Increasing boost is no option?
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #9 on: April 30, 2012, 10:27:49 PM »

It is maximum boost on low rpm.
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #10 on: May 02, 2012, 04:04:41 AM »

can you provide your latest mod?
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #11 on: May 02, 2012, 04:29:41 AM »

take a serious look at: these four 13x16 maps:
1d69b4,1d6b92,1d6d70
and(!) 1d67d6

you find the same structure also around $18AD76
check it. also there are 2 3D maps before these Lambda based maps. which could be some kind of fuel based (mg) smoke limiting. I guess in VAG EDC16 you can switch if lambda or mass based limits?
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #12 on: May 07, 2012, 07:26:36 PM »

18a9ba - no result  Sad
Logged
lulu2003
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 242



« Reply #13 on: May 08, 2012, 04:04:40 AM »

sorry, I think I cannot help anymore. no experience with VAG.
did you try to ask in the ecuconnection forum? they are very kind to answer some diesel specific questions.
Logged
melodic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #14 on: May 08, 2012, 08:58:28 AM »

thank you anyway, lulu
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 18 queries. (Pretty URLs adds 0s, 0q)