Pages: [1]
Author Topic: read dsg dq250 mqb TVS Maps  (Read 984 times)
rego88
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 6


« on: May 03, 2020, 03:04:56 PM »

hello, i have buy a golf 7 gti with a TVS Dq250 MQB Maps inside.... is inpossible read via Bench, i have a Flex and x17 magic motorsport, but when try to connect inside the gearbox i hear a buzz, and don' t possible connect..... any idea for read, boot mode, hany software or other??' thanks!!
Logged
telnet402m
Full Member
***

Karma: +3/-6
Offline Offline

Posts: 88


« Reply #1 on: May 03, 2020, 07:32:52 PM »

You have to start from scratch or leave it as it is.  Smiley
Logged
sandor1987
Jr. Member
**

Karma: +5/-2
Offline Offline

Posts: 44


« Reply #2 on: May 06, 2020, 07:52:55 AM »

TVS use different styles of NOREAD...
read in bootmode!
Logged
prj
Hero Member
*****

Karma: +348/-71
Offline Offline

Posts: 3897


« Reply #3 on: May 07, 2020, 12:44:03 AM »

TVS use different styles of NOREAD...
read in bootmode!

SBOOT is blocked, and tricore boot... well, then he can bin the mecha unit after.
Go to TVS dealer and ask for it to be flashed to stock.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 16 queries. (Pretty URLs adds 0s, 0q)