Pages: [1] 2 3 ... 5
Author Topic: The 5120 hack for 06A906032HS  (Read 6784 times)
justinvw2646
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 110


« on: May 06, 2020, 07:44:51 AM »

Can someone confirm if the variables:pvdk_w, pus_w, fvpdkdsl_w, fho_w, frhodkr_w, and SDLDSUA axis calculation have been changed correctly using IDA in this bin?? The rest of the BIN is bone stock so ALL of the maps will need scaled as in the outline, but if the ASM stuff has been done correctly in IDA this will be an excellent starting point for the 1.8T guys (myself included) as I have verified 032PL can be crossflashed to 032HS without immo off.

Thank you

Justin
« Last Edit: May 06, 2020, 08:09:52 AM by justinvw2646 » Logged
nyet
Administrator
Hero Member
*****

Karma: +496/-88
Offline Offline

Posts: 11157


WWW
« Reply #1 on: May 06, 2020, 09:55:20 AM »

IMO this is worth a community thread.

Split accordingly.

If i get a chance I will take a peek at the image
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
justinvw2646
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 110


« Reply #2 on: May 06, 2020, 11:06:15 AM »

Thanks Nyet.
Logged
justinvw2646
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 110


« Reply #3 on: May 06, 2020, 11:32:52 AM »

Went through the bin and scaled all of the maps listed on the wiki that were defined in the XDF's I have. Here is the scaling in progress BIN with a txt document outlining what was done, found, not found etc.
Logged
nyet
Administrator
Hero Member
*****

Karma: +496/-88
Offline Offline

Posts: 11157


WWW
« Reply #4 on: May 06, 2020, 12:49:19 PM »

Thanks Nyet.

Thank you for taking the initiative. It is appreciated and valued.

Sadly, I may not have a chance to look at your bin since it would require me also getting IDA up and set up with that BIN
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
noice
Newbie
*

Karma: +14/-2
Offline Offline

Posts: 23


« Reply #5 on: May 12, 2020, 06:57:33 PM »

Will take a look at this as soon as I can find time.

I have a 8N0906018AH (AMK engine) software with all the asm patches and map pack with all the maps that needs rescaling marked. I will share this too.


Sent from my iPhone using Tapatalk
Logged
noice
Newbie
*

Karma: +14/-2
Offline Offline

Posts: 23


« Reply #6 on: May 14, 2020, 01:01:27 PM »

Can someone confirm if the variables:pvdk_w, pus_w, fvpdkdsl_w, fho_w, frhodkr_w, and SDLDSUA axis calculation have been changed correctly using IDA in this bin?? The rest of the BIN is bone stock so ALL of the maps will need scaled as in the outline, but if the ASM stuff has been done correctly in IDA this will be an excellent starting point for the 1.8T guys (myself included) as I have verified 032PL can be crossflashed to 032HS without immo off.

Thank you

Justin

Everything is in the right place, except the SDLDSUA axis.

In ME7.5 we have KFSDLDSUA and its axis is not hard-coded. Its a 16x6 map, located at 15B32 in your file. X-axis, witch is pressure, is located at 15B12. Y-axis is at 15B0C.


Logged
justinvw2646
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 110


« Reply #7 on: May 21, 2020, 05:12:04 PM »

Thanks for taking a look Noice, but I opened the bin and XDF and confirmed the x y axis and map location (KFSDLDSUA) are correctly defined in the XDF???
Logged
noice
Newbie
*

Karma: +14/-2
Offline Offline

Posts: 23


« Reply #8 on: May 21, 2020, 05:21:12 PM »

Thanks for taking a look Noice, but I opened the bin and XDF and confirmed the x y axis and map location (KFSDLDSUA) are correctly defined in the XDF???

I didn't opened the XDF to check.

The address I gave are based on disassembling and they are correct.
Logged
justinvw2646
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 110


« Reply #9 on: May 21, 2020, 05:27:06 PM »

gotcha, sorry I thought you were saying they were incorrect
Logged
Dave9n3
Sr. Member
****

Karma: +21/-0
Offline Offline

Posts: 265


« Reply #10 on: June 05, 2020, 03:47:09 PM »

Went through the bin and scaled all of the maps listed on the wiki that were defined in the XDF's I have. Here is the scaling in progress BIN with a txt document outlining what was done, found, not found etc.

Hopefully can keep this project going. I think I have found the extras that you were missing.

0x1498E;"Integratorbeiwert für Saugrohrmodell (Dynamik)";"KISRM";"1x1"
0x27D3C;"Konstante für Regeneriermasse in Leitung TEV-Saugrohr bei Normdruck + Normtemp.";"KMLTESG";"1x1"
0x1C83E;"Ersatzwert für Umgebungsdruck";"PUE";"1x1"
0x1C816;"Delta Druckwert für Signalvergleich Ladedruck mit Umgebungsdruck";"DPDSVLU";"1x1"
0x1C840;"Umgebungsdruckbegrenzung minimal";"PUMN";"1x1"
0x1C842;"Umgebungsdruckbegrenzung maximal";"PUMX";"1x1"
0x1C846;"pvdk min. Schwelle für Fehlererkennung Ladedrucksensor";"PVDKMN";"1x1"
0x18A25;"Zeitkonstante für Filterung von pu und fho in GGDSU";"ZDSU";"1x1"
0x28A5A;"Ersatzwert für Umgebungsdruck für BKV";"PUEBKV";"1x1"
0x15B32;"Schwelle für dynamische Schubumluftventilsteuerung aktiv";"KFSDLDSUA";"16x6"


Uploaded KP. I was going to add them to the XDF but didnt want to step on any toes. I cant contribute much more than this but would love to learn about the ASM changes as I'm a noob with IDA.
Logged
justinvw2646
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 110


« Reply #11 on: June 09, 2020, 03:22:37 PM »

If you want to add them to the XDF there is no stepping on toes as far as I’m concerned. This is for all of the 1.8t community and I appreciate your help.
Logged
prj
Hero Member
*****

Karma: +364/-82
Offline Offline

Posts: 3953


« Reply #12 on: June 10, 2020, 02:47:59 AM »

What's the point in doing this on some obscure bin?

It's enough to do one bin for every bootrom and then crossflash ECU to it.
And I'm pretty sure there's a bin that's already done.
Logged
BlackT
Hero Member
*****

Karma: +43/-24
Offline Offline

Posts: 856



« Reply #13 on: June 10, 2020, 11:20:24 AM »

Audi A4 and A3 have same bootroom. But things like ESP, transmision maybe can't be coded after croshflashing.


What's the point in doing this on some obscure bin?

It's enough to do one bin for every bootrom and then crossflash ECU to it.
And I'm pretty sure there's a bin that's already done.
Logged
Dave9n3
Sr. Member
****

Karma: +21/-0
Offline Offline

Posts: 265


« Reply #14 on: June 10, 2020, 03:08:08 PM »

If you want to add them to the XDF there is no stepping on toes as far as I’m concerned. This is for all of the 1.8t community and I appreciate your help.

Updated the XDF with what I believe are the extra ones you were missing.

I'm unsure of ZDSU which is currently 3 seconds (supposed to sqrt and multiply by two gives 3.46, will only accept a value of 3 or 4) does this need to be changed or can it stay original?

Another i'm unsure of is KMLTESG - value in table is 0.00001600 but wont allow for it to be divided by two, it'll only accept zero or the original, can't go lower.

Hopefully someone more experienced may be able to clear this up.


PRJ - Would something like 06A906032HJ be a better option for cross compatibility? personally I don't mind which binary, i'd just like to learn how to do it so I can do the binary i'm using once i have the know how!

Logged
Pages: [1] 2 3 ... 5
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)