Adapt Keys with immo off / turn immo back on

Pages: [1]

« previous next »

Author

Topic: Adapt Keys with immo off / turn immo back on (Read 849 times)

Jannik07

Full Member

Karma: +5/-2
Offline

Offline

Posts: 77

	Adapt Keys with immo off / turn immo back on « on: February 21, 2024, 03:24:09 PM »

Hello =)

A friend of mine destroyed his key of his S4 B5.
No Problem I said, just get a new key and we will adapt it.

But in his car there is not the original ECU. Additionally its immo off. From what I have read immo must be on to adapt keys to the cluster.

My problem: how to turn back immo on when I have no original EEPROM-File?
And even if I turn immo back on. The Login Code of ECU and Cluster will differ or not?

Maybe someone can sugest anything=)

Thanks!


	Logged

rotoutxi

Newbie

Karma: +0/-0
Offline

Offline

Posts: 14

	Re: Adapt Keys with immo off / turn immo back on « Reply #1 on: February 21, 2024, 03:36:35 PM »

you need the immo pin of the cluster, to match the key, post the cluster reading,


	Logged

stuydub

Full Member

Karma: +24/-12
Offline

Offline

Posts: 230

	Re: Adapt Keys with immo off / turn immo back on « Reply #2 on: February 21, 2024, 11:04:03 PM »

Immo has to be ON
ECU and CLUSTER have to be paired before a key can paired


	Logged

Jannik07

Full Member

Karma: +5/-2
Offline

Offline

Posts: 77

	Re: Adapt Keys with immo off / turn immo back on « Reply #3 on: February 21, 2024, 11:57:38 PM »

Thanks for your answers.
I already have the Cluster login.
But how to turn immo on in ecu and pair it to the Cluster afterwards?


	Logged

Jannik07

Full Member

Karma: +5/-2
Offline

Offline

Posts: 77

	Re: Adapt Keys with immo off / turn immo back on « Reply #4 on: February 23, 2024, 12:13:39 PM »

Nobody?


	Logged

grayjay

Newbie

Karma: +3/-1
Offline

Offline

Posts: 21

	Re: Adapt Keys with immo off / turn immo back on « Reply #5 on: February 23, 2024, 02:10:21 PM »

Read a copy ECUs EEPROM file (not the flash .bin), then use tunerpro to edit the file and update the SKC to match that of the cluster.

Then, use eeprom tool
http://nefariousmotorsports.com/forum/index.php?topic=6134.0
to set the immo on and fix checksum. It might be possible to change the SKC via the EEPROM tool (instead of in tunerpro), I just dont remember if this feature is built in, likely so. Note that eeprom tool can be used as standalone command line program or it is even easier to use with the visual logger GUI.

Once you have the EEPROM file ready, then you will need to use a bench-flash cable to flash it directly back to the ECU in boot mode (not via the cars OBD port!).

With matching SKC in cluster and ECU, and with the immo turned on then you should be able to pair new keys to the IMMO.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 28, 2024, 12:28:23 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search