Pages: [1]
Author Topic: 4D0907560AP 2001 S8 D2 ECU bootmode CSpin  (Read 3198 times)
boomfunk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: May 09, 2020, 10:13:54 AM »

I am getting ready to flash a manual transmission file onto my S8 ecu and wanted to make a backup of the eeprom also in case of any errors I can revert changes.

I am familiar with flashing ME7.5 ecus and a few ME7.1.1 R32 /24V VR6 ecus.

Before I attempt to read/write the eeprom I was hoping someone might be able to verify the CSpin that needs to be used in argdubs tool.

Attatched is my original read from the car and the manual transmission file that I will be using.

Would it be read/written with CSpin 6.3 and 95P08 selected?

Thanks.
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #1 on: May 09, 2020, 10:48:13 AM »

Can this help you?
http://nefariousmotorsports.com/forum/index.php?topic=1168.msg122967#msg122967
Logged
boomfunk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #2 on: May 09, 2020, 12:58:18 PM »

It auto selected the CSpin. For anyone else looking at this later the CSpin was 6.3

Also soft coding for the manual file appears to be 10713.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)