Pages: [1]
Author Topic: low voltage to fuel injectors  (Read 510 times)
Full Member

Karma: +2/-3
Offline Offline

Posts: 107

« on: May 15, 2020, 02:29:29 PM »

So im trying to figure out why my IDC is going thru the roof and after doing some digging I found that my Injector at the connector is only getting 2.7v with key on?. I did notice that ill get 12v at the injector connector when I unplug the negative cable at the battery so Im thinking I got a short to ground somewhere. just dont know where? any ideas?
Hero Member

Karma: +105/-25
Offline Offline

Posts: 1928

« Reply #1 on: May 18, 2020, 12:50:35 AM »

How can you get 12v at the connector when the battery is disconnected?  That's impossible.
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)