Pages: 1 2 [3]
Author Topic: B_lambts, Throttle Cut, Soft Limp, ME7.5 1.8T  (Read 11117 times)
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #30 on: September 19, 2020, 01:05:19 PM »

Between wastegate duty cycle, boost req, and boost actual...
I see that you have a massive boost leak and your pissing everything away, or your turbo is life of Elvis, gone
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #31 on: September 19, 2020, 01:12:21 PM »

Or inlet collapsing, hard to tell
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
boim
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 35


« Reply #32 on: October 07, 2020, 11:06:25 AM »

Made another run with some gear 3 pulls.

Yea, turbo is old, stock K03s. Rests is stock as well. Just wanted to max it out. She's just a daily city car with occasionally 150-200km trip. Planing to upgrade to K04 tho - when time and budget permit.

Anyway, for the moment, happy with her performance.

Thanks all, esp. Nyet, for helping me and her up to this state. Much appreciated. Otherwise I'd stay with that cut caused by that TIP big leak and bad MAF!
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #33 on: October 07, 2020, 12:24:23 PM »

You have a massive boost leak.

Look at your lambda control.

Not sure whats the deal with the x axis on the graph you posted.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)