1.8T AMK pops- What am I doing wrong?

Pages: [1]

« previous next »

Author

Topic: 1.8T AMK pops- What am I doing wrong? (Read 3169 times)

Cupra21

Newbie

Karma: +0/-3
Offline

Offline

Posts: 5

	1.8T AMK pops- What am I doing wrong? « on: February 08, 2020, 05:23:59 PM »

Hi, I've been trying to convert the map to pops & bangs for 2 weeks. First attempt (attachment 1stTry) and nothing. I had KFZWMN on -21.75 *. Silence ... The second attempt (I haven't uploaded this map yet (2ndTry) because I prefer to ask
(attachment 2ndTry) changed KFZWMN to -30 * and after reading the forum I changed + 1s more fuel cutoff time. I'm going in the right direction? does not expect a ready solution. Only tips Huh

Regards


	Logged

mantasos

Newbie

Karma: +0/-1
Offline

Offline

Posts: 8

	Re: 1.8T AMK pops- What am I doing wrong? « Reply #1 on: February 09, 2020, 11:52:13 PM »

Hi,

KFZW maps Set the 2 low load rows( lets say from 4000 to 5000 RPM ) to -25 degrees
KFZWMN maps Set the 2 low load rows( lets say from 4000 to 5000 RPM ) to -25 degrees
CWSAwE Set this to 1
KFTVSA Set to 2 or 2.5 in between the RPM range that you set before

Thats all


	Logged

michelhadid

Jr. Member

Karma: +9/-2
Offline

Offline

Posts: 38

	Re: 1.8T AMK pops- What am I doing wrong? « Reply #2 on: February 23, 2020, 10:40:14 PM »

Here you go, try it out, Will pop hard beyond 4k rpm


	Logged

Cupra21

Newbie

Karma: +0/-3
Offline

Offline

Posts: 5

	Re: 1.8T AMK pops- What am I doing wrong? « Reply #3 on: May 21, 2020, 05:04:46 PM »

I'm sorry for refreshment my old topic but i think its better than create new

I have question. I managed to make pops but interestingly they do not work at a standstill: O Is there any other map responsible for the pops at the standstill

My pops with dp 2.75 and fnish exhaust ori cupra r: https://www.youtube.com/watch?v=UKUsjr_anxc


	Logged

kubawd

Jr. Member

Karma: +5/-1
Offline

Offline

Posts: 37

	Re: 1.8T AMK pops- What am I doing wrong? « Reply #4 on: May 22, 2020, 11:49:35 PM »

Yes, there's another's map that you need to edit. It's TVSAG0. I've set it to 2.5 and it pops on standstill(S3 AMK). If you cant find it in your xdf, pm me. Can you post what exactly did you change to get such pops as in the video?


« Last Edit: May 23, 2020, 12:39:20 AM by kubawd »	Logged

Sandstorm3k

Sr. Member

Karma: +10/-14
Offline

Offline

Posts: 403

	Re: 1.8T AMK pops- What am I doing wrong? « Reply #5 on: May 24, 2020, 05:48:10 AM »

I've got exactly the same issue!!

KFTVSA 2.5
CWSAWE 0 or 1 didn't seem to make a difference.
KFZWMN lowest two tweaked but something around -20 to -30
KFZW standard, changing made the car respond terrible when lifting off and then back onto the gas pedal.
KFZWOP using negative values gave me extremely good results, tweak this to whichever you like.

I read somewhere i need TVSAG0 aswell but i really have no clue how to go around finding this one. As it is also not really discussed anywhere nor can i find anything about it.


« Last Edit: May 24, 2020, 05:53:46 AM by Sandstorm3k »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 18, 2024, 06:17:20 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search