Pages: [1]
Author Topic: MED9 tfsi Evap delete  (Read 3884 times)
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« on: May 26, 2020, 12:10:53 PM »

Hello, i removed N80 valve and other parts from an trackday car, zeroed CDTES+CLATES/CLATEVE.  There is no error on diag, readines for evap is passed, but lambda LTFT still doesnt work(same as with error on diag). Is there any other trick to make it work?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: May 26, 2020, 09:40:00 PM »

Is keeping it physically plugged in not an option you want to consider? Otherwise need to find the ESKONF of MED9.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Albertoak
Full Member
***

Karma: +6/-16
Offline Offline

Posts: 75


Well done is better than well said....


« Reply #2 on: May 26, 2020, 10:43:28 PM »

Hello, i removed N80 valve and other parts from an trackday car, zeroed CDTES+CLATES/CLATEVE.  There is no error on diag, readines for evap is passed, but lambda LTFT still doesnt work(same as with error on diag). Is there any other trick to make it work?

just set to 0 CWPSTEVE (diagnosis of n80) and issue fixed. That's how I carry it.
Logged
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« Reply #3 on: May 27, 2020, 02:17:26 AM »

Thanks, will try.

Keep solenoid connected, then i must numb some other tables, to avoid low flow error trigger(which often happends on these cars anyways, with clogged N80 valve). Can anyone point which tables may be modified?
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #4 on: May 27, 2020, 06:27:38 AM »

med9 doesnt have a end staging table like me7 end staging is in project configuration
 
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #5 on: June 01, 2020, 06:56:30 AM »

If you dont figure it out, Share your rom.. or else follow the instruction above to turn off the system.
Logged
drbluetongue
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 41


« Reply #6 on: October 11, 2021, 03:03:33 PM »

just set to 0 CWPSTEVE (diagnosis of n80) and issue fixed. That's how I carry it.
Will this allow me to unplug it, or just disable the DTC?

EDIT: CWPSTEVE with the N80 unplugged works great, fuel trims still working.
« Last Edit: October 17, 2021, 05:14:08 PM by drbluetongue » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)