NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Data logging / injector headroom
Pages: [1]
« previous next »
Author Topic: Data logging / injector headroom  (Read 2965 times)
Bugman100
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 22
« on: June 06, 2020, 03:18:57 PM »
What else do i monitor in me7logger to work out how much headroom i have left in my injectors?

Just monitoring 02 / wideband lamba values doesnt tell me how much further i can push my engine.

BJX engine with 06a906032QN ecu

Has the usual deletes,  ko3s turbo, 2.5" downpipe and decat exhaust, large FMIC, 3" TIP,  Forged rods.

Still has standard injectors, pistons, valves and MAF.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #1 on: June 06, 2020, 03:21:57 PM »
Quote from: Bugman100 on June 06, 2020, 03:18:57 PM
What else do i monitor in me7logger

Not sure what you mean be "else"

http://files.s4wiki.com/ME7L-ecu/8D0907551M-typical.cfg
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Bugman100
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 22
« Reply #2 on: June 06, 2020, 03:38:38 PM »
Logging 02 and lamda only tells me once the injectors cannot supply enough fuel.

What other varibles can i log to work out how much capacity the injectors have left?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #3 on: June 06, 2020, 03:42:11 PM »
I literally posted the list. Why be selective? Just log all of it.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
fknbrkn
Hero Member
*****

Karma: +185/-21
Online Online

Posts: 1448


mk4 1.8T AUM
« Reply #4 on: June 06, 2020, 03:47:36 PM »
Injector duty cycle i believe
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12256


WWW
« Reply #5 on: June 06, 2020, 07:00:39 PM »
Quote from: fukenbroken on June 06, 2020, 03:47:36 PM
Injector duty cycle i believe


There is no injector duty cycle variable. It is caclulated by ECUxPlot using ti*RPM/2 IIRC
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Bugman100
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 22
« Reply #6 on: June 08, 2020, 07:48:15 AM »
Thanks guys,   Datalog shows what i suspected, going to need bigger injectors soon.  Grin
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 16, 2024, 10:48:33 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)