Hi Folks,

I use Me7 and Me3.8.3. Normally I wrote the Me3.8 (that version with 29F200 PSOP) with soldering and with an epromwriter like Batronix BX, some of that ecu I use with a socket, so I dont have to solder that chip everytime. That all is working ok. But I heard about a possibility to flash that chip through OBD port. But I havn`t any idea how to do that? Is that nonsense or is there a possibility or a tool that can write to that ecu? I dont ask for the Version with plcc44, thats not rewritable. I mean only the PSOP44 Version with the 29F200 flash memory

Actually I use a Galetto 1260 and a MPPS V18, VCDS (HEX+Can), some FTDI Cable and a K+Can Clone for OBD programming and diagnosis.

I`ve read about the MPPS V18 on the EOBD.UK Homepage, that ME3.8 will be writable. But I aw, ist not correct. That option is not included in the software.


Hello

FRC SPI can do it.


Is there any idea About a possibility for OBD flash?

Thank you.