Pages: [1]
Author Topic: Golf Mk6 GTI MED17 - does it really need TPROT removal?  (Read 2687 times)
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97



« on: June 21, 2020, 02:26:12 AM »

Hi everyone,

I have no experience with this ECU at all, and I am not trying to tune it, but when choosing between a Mk6 GTI and a Mk5, I went for the Mk5, because I read somewhere something about TPROT on a Mk6 GTI, so I was like "nope".

My friend recently got a Mk6 GTI (from Japan) and went in for a remap. I warned him about TPROT and whatnot, and also because I know the tuners here are basically file loaders.

According to him, they flashed his car to 'Stage 2' via OBD (using KESS) no need to read via BDM no nothing, nothing about TPROT and all.

So I just wanted to ask, if in your experience, is OBD flashing a Mk6 GTI possible without the use of BDM to remove tprot?
Logged

It is indeed a difference of perception that brings about our and others reality.
kuebk
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 47



« Reply #1 on: June 21, 2020, 06:57:28 AM »

OBD unlock.
Logged

VAG immo solutions (clone, immo off, repair) MEDC17, SIMOS, SDI, BCM2, ELV, DQ/DL/VL gearboxes, INVCON, MED9.x crypto
d3irb
Full Member
***

Karma: +134/-1
Offline Offline

Posts: 195


« Reply #2 on: June 23, 2020, 09:48:59 AM »


So I just wanted to ask, if in your experience, is OBD flashing a Mk6 GTI possible without the use of BDM to remove tprot?


Absolutely. There is an exploit which allows a custom SBOOT by bypassing the sigcheck in the hardware bootloader, at which point full hardware access is available and the firmware can be patched to remove sigcheck and enable full r/w. prj posts about it here: http://nefariousmotorsports.com/forum/index.php?topic=17566.msg134810#msg134810 . almost all available commercial tools offer this now.
Logged
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97



« Reply #3 on: June 26, 2020, 03:23:59 AM »

Absolutely. There is an exploit which allows a custom SBOOT by bypassing the sigcheck in the hardware bootloader, at which point full hardware access is available and the firmware can be patched to remove sigcheck and enable full r/w. prj posts about it here: http://nefariousmotorsports.com/forum/index.php?topic=17566.msg134810#msg134810 . almost all available commercial tools offer this now.

Thanks for the info @d3irb.  Smiley
Logged

It is indeed a difference of perception that brings about our and others reality.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)