NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > 8n1920980E Audi TT mk1 1.8t DSG swap.
Pages: [1]
« previous next »
Author Topic: 8n1920980E Audi TT mk1 1.8t DSG swap.  (Read 7011 times)
Sendoff74
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« on: July 03, 2020, 01:01:45 PM »
Hi.
I did dsg swap on 1.8t mk 1 quattro TT.
But now my speedometer doesn't work. As far as I know, that's because dsg has no analog speed sensor...And it uses signal that comes via CAN.
The question is, if it is possible to recode/edit EEPROM of my instrument cluster, to make it get signal via CAN.
Logged
Sendoff74
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #1 on: July 03, 2020, 01:02:37 PM »
The instrument cluster is Magnetic Marelli M73 D14
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498
« Reply #2 on: July 03, 2020, 03:03:54 PM »
There is no option for changing cluster eprom to read speed from CAN - you can try to connect analog output from ABS/ESP to cluster or create some sort of can/analog connverter
Logged
mastaro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #3 on: May 30, 2021, 03:22:29 PM »
Quote from: Sendoff74 on July 03, 2020, 01:01:45 PM
Hi.
I did dsg swap on 1.8t mk 1 quattro TT.
But now my speedometer doesn't work. As far as I know, that's because dsg has no analog speed sensor...And it uses signal that comes via CAN.
The question is, if it is possible to recode/edit EEPROM of my instrument cluster, to make it get signal via CAN.

I made that change too. you have to change the mechatronics for a golf 5. everything works apart from the reverse light.
Logged
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 210
« Reply #4 on: May 31, 2021, 05:56:11 AM »
Use an Arduino Nano and MCP2515 to get VSS from CANbus, and then generate an signal to the cluster.

Quote from: macxxx on July 03, 2020, 03:03:54 PM
you can try to connect analog output from ABS/ESP to cluster

On my A3 I was not able to find this output on the ABS module. On the wiring diagram, I found the possible pin, that on some cars goes to navigation system, but on my car, there is no output.
Logged
mastaro
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #5 on: June 04, 2021, 02:42:22 PM »
it comes out of the gearbox but you have to change hardware, your hw does not give a speed signal. your hw from vsignal via can
Logged
Audi225bam
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« Reply #6 on: August 20, 2023, 01:01:38 PM »
Quote from: Sendoff74 on July 03, 2020, 01:01:45 PM
Hi.
I did dsg swap on 1.8t mk 1 quattro TT.
But now my speedometer doesn't work. As far as I know, that's because dsg has no analog speed sensor...And it uses signal that comes via CAN.
The question is, if it is possible to recode/edit EEPROM of my instrument cluster, to make it get signal via CAN.

hi mate how and with what box please?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 11:54:01 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)