Pages: [1] 2
Author Topic: throttle valve closing at 5000rpm  (Read 6643 times)
hillbily1988
Jr. Member
**

Karma: +1/-6
Offline Offline

Posts: 42


« on: July 08, 2020, 02:19:22 PM »

i have been getting this problem where boost and power cuts at 5000rpm
did some logging and found the throttle valve is closing when still at WOT
just before, and probably the cause my stft are at -20

do i adjust krkte or do i do it in fkkvs

if fkkvs i need some help as i have no idea how much or little i adjust the numbers
i assume they are injector opening time

i have attached a log of two runs
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #1 on: July 08, 2020, 03:02:57 PM »

why on earth would you use fkkvs to adjust out 20% (probaly more , you maxed it out) fueling problems?

I don't get why that is even an option in your mind, given the copious amount of information about how to tune KRKTE, TVUB, and MLHFM properly.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #2 on: July 08, 2020, 03:05:47 PM »

Also is your ECU not compatible with ME7L?

You also didn't mention

1) what car
2) what motor
3) what ecu p/n
4) what mods
5) what you have changed in your file


Not sure what you expect anyone to say.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1421



« Reply #3 on: July 08, 2020, 03:09:50 PM »

Also is your ECU not compatible with ME7L?

You also didn't mention

1) what car
2) what motor
3) what ecu p/n
4) what mods
5) what you have changed in your file


Not sure what you expect anyone to say.

Yes

06A 906 032 DR,ADVMB,1.8L R4/5VT         0002,
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #4 on: July 08, 2020, 03:11:40 PM »

I'm not downloading what is probably a worthless VCDS file to guess wtf he's running.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
hillbily1988
Jr. Member
**

Karma: +1/-6
Offline Offline

Posts: 42


« Reply #5 on: July 08, 2020, 03:21:42 PM »

sorry didnt think about that.
it is a golf 1.8t with 550cc bosch injectors, big turbo build, fmic, high flow pump etc.
i just wasnt sure if just adjusting krkte was correct as normal driving the trims are perfect, it just starts coming up when i get in the higher rev range.
thought if i just adjusted krkte it would then put my normal driving +20%
and using fkkvs i might be able to adjust the fueling in those areas.

im not on here to have my backside torn out, im trying to learn the best ways to fix an issue.
i have read post about using fkkvs to fix fueling issues.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #6 on: July 08, 2020, 04:01:34 PM »

sorry didnt think about that.
it is a golf 1.8t with 550cc bosch injectors, big turbo build, fmic, high flow pump etc.
i just wasnt sure if just adjusting krkte was correct as normal driving the trims are perfect, it just starts coming up when i get in the higher rev range.
thought if i just adjusted krkte it would then put my normal driving +20%
and using fkkvs i might be able to adjust the fueling in those areas.

im not on here to have my backside torn out, im trying to learn the best ways to fix an issue.
i have read post about using fkkvs to fix fueling issues.


FKKVS isnt used to "Fix" 20% fueling correction though.. If you get 20% stfts something is seriously wrong with the car, I'd prolly start with the hardware first, and at the very least some me7 logs and summary of adjustments made.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #7 on: July 08, 2020, 05:49:09 PM »

Dont fix hardware problems by changing maps around.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
hillbily1988
Jr. Member
**

Karma: +1/-6
Offline Offline

Posts: 42


« Reply #8 on: July 08, 2020, 11:17:04 PM »

Any idea what could be causing it?
I have already changed the MAF, plugs, switched to mbc, hard intake pipe incase it was collapsing, checked turbo for play, changed fpr.
Just can't seem to fix it.
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1421



« Reply #9 on: July 09, 2020, 01:57:19 AM »

Make a log in 3 gear with ME7 logger
Logged
fknbrkn
Hero Member
*****

Karma: +177/-18
Offline Offline

Posts: 1402


mk4 1.8T AUM


« Reply #10 on: July 09, 2020, 02:53:10 AM »

Check fpr vac line
And fuel pressure @wot
Logged
_nameless
Hero Member
*****

Karma: +323/-449
Offline Offline

Posts: 2688



« Reply #11 on: July 09, 2020, 04:04:39 AM »

im not on here to have my backside torn out, im trying to learn the best ways to fix an issue.
i have read post about using fkkvs to fix fueling issues.

Well then follow the form rules. Poa none really cares about your issues. Also when you dont post how you should or do proper research / reading before hand and ask for help wont get far. Also if you havent changed your injector dead times you'll wanna do that too
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
hillbily1988
Jr. Member
**

Karma: +1/-6
Offline Offline

Posts: 42


« Reply #12 on: July 09, 2020, 10:11:23 AM »

I will get me7 logger sorted later and try get a run done tonight or tomorrow morning.
Been looking at my trims a bit more and at idle I'm getting -15 and if I give it an air leak (took vac off recirc valve) I get +15 it's like it wants a small air leak to be right.
Logged
hillbily1988
Jr. Member
**

Karma: +1/-6
Offline Offline

Posts: 42


« Reply #13 on: July 09, 2020, 11:46:16 AM »

Scrap that I have done a throttle valve adaption and now the idle trim is good,  just any more than 50% throttle and in at - 14 and climbing
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #14 on: July 09, 2020, 12:28:46 PM »

Did you fix TVUB?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)