I've been poking around here for a long time without much success.

 I have pulled the factory .bin from the ecu.

 I cant find a proper xls definition file for this ecu;  8N0906018S, 004, 0x000019c8, etc
 
 Its a 2000 TTQ1.8, 180hp, autocross and hill climb project, still in mechanical progress, and I want to start the tuninghe  process.

 Mechanical mods so far;

 Header, k04 hybrid, larger hot side than stock,,.065 I think,,3 inch catless down pipe, fmic 2.5 plumbing, Forge intake, 3 inch maf housing,,a variety of injectors to chose from including ev15 550s,,,all that to compensate for

 I would like to remove the dtcs for sai,,downstream 02 sensor,,have a motometer afr with wideband installed,,the wiki lists these for the Mbox.

  I have NEO hexeditor, but im not finding line info for these items.

 There are 2 xls files I have found here,,and one partial for ecu # 8no906018k,,,a 2001 ttq 220, and one for the ecu above,,the stock one with no immo
Thanks,,site is great
 

I have damos files and originals for almost any me7.5. 8f you want i can export a csv list of maps so you can build your own.

 I have decided to go with AEM stand alone ecu for this project, its a lot of $, but more stable, will be able to use wideband and read an afr meter and boost gauge through the ecu, or separately on a pod or custom cluster.
Appreciate the site, learned a lot about these cars systems

 It is a track car