NefMoto > Technical > Flashing and Chipping > Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher?
Pages: [1]
« previous next »
Author Topic: Anyone used BMW IMPA cable for flashing with Nefmoto ecuflasher?  (Read 4746 times)
Mendizalea
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
Tryed to flash my TT APX ecu (ME7.1 I think )  using bmw impa cable but Nefmoto Ecuflasher does not recognize cable.
I use the same cable with ME7loger to make logs and goes perfec. This is normal?  Anyone  used  wiht bmw impa cable using Nefmoto Ecuflasher with success?
Do i need to buy Mpps cable to flash?

Thanks in advance.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12233


WWW
« Reply #1 on: July 21, 2020, 10:35:29 AM »
Nef flasher requires an FTDI based cable. This is explicitly mentioned throughout the documentation, readmes, and the various FAQs here.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #2 on: August 09, 2020, 11:36:25 PM »
Guys, what is neff moto flasher? Where ican get him? How much cost? And what device use?

Thanks
Logged
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #3 on: August 09, 2020, 11:38:13 PM »
Quote from: nyet on July 21, 2020, 10:35:29 AM
Nef flasher requires an FTDI based cable. This is explicitly mentioned throughout the documentation, readmes, and the various FAQs here.

Inpa kabel, is probably old kkl kable (vag409) ftdi based.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12233


WWW
« Reply #4 on: August 09, 2020, 11:52:35 PM »
http://nefariousmotorsports.com/forum/index.php?topic=12861.0title=
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5840
« Reply #5 on: August 10, 2020, 12:02:37 AM »
K+DCAN works and they're all FTDI.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
diggy79
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #6 on: August 28, 2020, 03:40:44 PM »
can you use those K+DCAN IMPA cables with FTDI Stated above for boot mode to do Immo off.?

Using the DOS based Argdub's programs?

I'm trying to confirm my setup, as i have done some A6 2.7T ECUs in boot mode couple years ago, and can't remember which cable i used.

I'm having a hell of time getting a 01 A6 4.2L ECU with ME7.1.1 in boot mode on the bench to remove Immo.

Thanks 
Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113
« Reply #7 on: August 28, 2020, 11:59:31 PM »
I use a r232 INPA cable for boot immo and for nef flash. Does not work with galeto.

Just need to.find the com port its riding on and syntax it approprietly
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 25, 2024, 09:38:45 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)