Pages: [1]
Author Topic: 3.0TFSI LOG, Max power request  (Read 357 times)
majsterx
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« on: July 31, 2020, 04:49:05 AM »

Hello guys i needed a little advice about my personal car. I'm before install meth, but before wanna calibrate them well.
My main problem is no knowledge about best ignition for that engine. Actually totally no knocking.
EGT seems i have perfect, don't know why my boost reduce to 1.2bar but i will recheck map i remember from 4k i req 1.3
I think it should have at some point more problem, and most problematic is  ex 1200+ arround 2k rpms feeling like clogged exhaust i will try reduce boost at that point.

Can someone check my logs ? Wink

Thanks guys
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 297



« Reply #1 on: August 05, 2020, 07:01:45 PM »

read how the engine management works. remeber those blowers have bypass flaps in them so. if your knocking its going to pull boost and timing.,
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)