Wiring up VVT on 032 LP ECU

Pages: [1]

« previous next »

Author

Topic: Wiring up VVT on 032 LP ECU (Read 2295 times)

vtraudt

Sr. Member

Karma: +4/-7
Offline

Offline

Posts: 377

	Wiring up VVT on 032 LP ECU « on: August 08, 2020, 04:21:37 PM »

I need to wire up the VVT. ECU is 032LP.
Diagrams I found show

"N205 Inlet Camshaft Control Valve 1" and showing pin 115 (green/white "gn/ws") for pin 2 and "D102 connection 2, in engine wiring harness" for pin 1 ge/sw (yellow/black, never figured out where that is terminating or what fuse that is on, but seems to supply +12V to N75, N249 and N205).

Can someone confirm?

If true, I would need to run "key on" +12V to pint 1 (yellow/black at VVT connector) and green/white to pin 115?


	Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: Wiring up VVT on 032 LP ECU « Reply #1 on: October 10, 2023, 06:19:14 PM »

Yes, its the same positive (+) for these solenoids. Just make a good splice on the wire and its good to go.
The ECU controls on the negative side, to that pin you mentioned.


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: Wiring up VVT on 032 LP ECU « Reply #2 on: October 11, 2023, 02:25:20 AM »

It should probably not be wired from key on ignition!
If you can see it is going to N75, N249, N205, then splice it into the +12V for any one of those.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 05:01:53 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search