NefMoto > Technical > Tuning > MSD80/81 torque intervention - closing TB
Pages: [1]
« previous next »
Author Topic: MSD80/81 torque intervention - closing TB  (Read 3326 times)
ballaownz
Newbie
*

Karma: +1/-1
Offline Offline

Posts: 7
« on: August 25, 2020, 05:21:01 PM »
hello guys, noob question...

Im tuning a single turbo N54 - MSD81 and Im getting some torque intervention.

The car is closing TB .

I found in Damos 3 variables to inhibit torque intervention

lc_tq_lim_inh - logical constant inhibition torque intervetion for safety
lc_tq_lim_inh_fast - logical constant inhibition torque intervetion for safety for fast path
lc_tq_lim_inh_slow - logical constant inhibition torque intervetion for safety for slow path

All 3 are set to 0 on ORI. Can I set one of them to 1 to disable torque intervention?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6038
« Reply #1 on: August 26, 2020, 01:10:20 AM »
No.
And that's not why it's not closing throttle either.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
ballaownz
Newbie
*

Karma: +1/-1
Offline Offline

Posts: 7
« Reply #2 on: August 28, 2020, 08:39:35 PM »
Quote from: prj on August 26, 2020, 01:10:20 AM
No.
And that's not why it's not closing throttle either.

I was talking to a friend and he told me that torque intervention is outside map area.

Car is closing TB even with less boost than boost limiter =(
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Online Online

Posts: 388
« Reply #3 on: August 29, 2020, 09:34:39 AM »
No, I Said to request more than 19psi you shall deal with maps witch are outside cks from regular tools (like kess)...unless kess fixed.

Everytime i changed anything relatei to Optimal torque I had no start and cks error...but it was 3 or 4 years ago
Logged
ballaownz
Newbie
*

Karma: +1/-1
Offline Offline

Posts: 7
« Reply #4 on: September 06, 2020, 03:32:35 PM »
Quote from: overspeed on August 29, 2020, 09:34:39 AM
No, I Said to request more than 19psi you shall deal with maps witch are outside cks from regular tools (like kess)...unless kess fixed.

Everytime i changed anything relatei to Optimal torque I had no start and cks error...but it was 3 or 4 years ago

fixed tb closing writing with MHD.  Wink

and yes, very weird random cks error writing with NewGenius. If I touch torque intervention variables, car doesnt start.
Logged
Samtuning
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #5 on: October 22, 2020, 02:07:17 AM »
its closing throttle because actual load might be higher than requested
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 01:19:07 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)