Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
Read Me7.1 with 29f400BB
Pages: [
1
]
« previous
next »
Author
Topic: Read Me7.1 with 29f400BB (Read 4177 times)
Jannik07
Full Member
Karma: +5/-2
Offline
Posts: 82
Read Me7.1 with 29f400BB
« on: September 27, 2020, 05:18:42 AM »
Hello,
A friend of mine gave me hos ecu so I can tune it for him.
Today i tried to read the Flash, but it did not work.
My mpps and my ktag are only able to read the 29f800 I think.
In my galletto i habe the Option to read a f400. But that did not work at all. Any solution? Ecu is taken from s4 b5 pre facelift.
I put pin 24 to ground. Then Switched the Power source on. After 3-5 seconds i removed the ground Then Hit ecu data. But my galletto v54 wont read anything. Is there a way to read with ktag or kess?
Greetings
Logged
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Re: Read Me7.1 with 29f400BB
« Reply #1 on: September 27, 2020, 05:32:27 AM »
Galleto 1260 can read it without problem.
I never used MPPS V16 in boot mode but it schould work also
Logged
Jannik07
Full Member
Karma: +5/-2
Offline
Posts: 82
Re: Read Me7.1 with 29f400BB
« Reply #2 on: September 27, 2020, 09:00:41 AM »
1260 thats only the eobd cable right?
So i need to prepare an Adapter for supplying connection to the ecu on the bench.
Pin 21,62 and 3 12v
Pin 1,2 ground
Pin 43 kline
Ground Pin 24 of the eeprom
Switch on the Power supply, and disconnect Pin 24 after 3-5 seconds then Start the Tool?
Thanks for your help.
Logged
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Re: Read Me7.1 with 29f400BB
« Reply #3 on: September 27, 2020, 11:21:20 AM »
Thats right
Logged
Jannik07
Full Member
Karma: +5/-2
Offline
Posts: 82
Re: Read Me7.1 with 29f400BB
« Reply #4 on: September 27, 2020, 12:45:36 PM »
ok. I will try and report. Thanks again =)
Logged
Jannik07
Full Member
Karma: +5/-2
Offline
Posts: 82
Re: Read Me7.1 with 29f400BB
« Reply #5 on: October 04, 2020, 12:30:25 PM »
I tested it with MPPS V16 and it worked quite well.
All you need to know is, that you must Look for "Generic" in the manufacturer-list. When you try read it via Audi S4 or something you will fail
So thanks again !
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 23, 2024, 11:27:24 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
