Pages: [1]
Author Topic: Its my lamfa correct?  (Read 2312 times)
Kejsi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 44


« on: February 05, 2021, 11:45:03 AM »

20210205-193736" border="0

E50
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: February 06, 2021, 01:37:35 AM »

why on earth would you not use screenshot?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #2 on: February 06, 2021, 05:20:30 AM »

What do you mean 'correct'?
Logged
Kejsi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 44


« Reply #3 on: February 07, 2021, 09:52:16 AM »

maybe I chose the wrong question. 1.8t engine fuel 50/50 petrol / ethanol 96%
on gasoline only afr at lambda 1 is 14.7 or when refueling e50 lambda must also be equal to 1 (14.7 afr)? or afr for e50 should be around 12.9 and I don't know if it's too poor.
Is the statechomic mixture at lambda 1 always correct regardless of the fuel type?

Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #4 on: February 07, 2021, 10:53:22 AM »

maybe I chose the wrong question. 1.8t engine fuel 50/50 petrol / ethanol 96%
on gasoline only afr at lambda 1 is 14.7 or when refueling e50 lambda must also be equal to 1 (14.7 afr)? or afr for e50 should be around 12.9 and I don't know if it's too poor.
Is the statechomic mixture at lambda 1 always correct regardless of the fuel type?

It is your responsibility to set up krkte such that that is true. It is injection time for a given *air mass*.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Kejsi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 44


« Reply #5 on: February 07, 2021, 11:46:07 AM »

that is, I understand, we increase the amount of fuel to the air, thanks to: P
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)