NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Problem: Boost is pulsing
Pages: [1]
« previous next »
Author Topic: Problem: Boost is pulsing  (Read 3979 times)
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86
« on: October 02, 2020, 10:37:56 AM »
Hi,

I got a problem with my boost on partitial load until 0,9-1bar everything is fine, but then on partitial load and on WOT boost is pulsing.
WGDC is jumping between 85% and ~60%
I tryed to limit boost with KFLDRL to 85% WGDC and DIMX on WOT because my Turbos can run 2bar+
Does anyone have an idea what can cause this behavior?
Should I maybe set DIMX to 95 in the last row ?

Thanks in advance
« Last Edit: October 02, 2020, 10:41:54 AM by MetalForLive » Logged
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157
« Reply #1 on: October 02, 2020, 11:31:57 AM »
Quote from: MetalForLive on October 02, 2020, 10:37:56 AM
Hi,

I got a problem with my boost on partitial load until 0,9-1bar everything is fine, but then on partitial load and on WOT boost is pulsing.
WGDC is jumping between 85% and ~60%
I tryed to limit boost with KFLDRL to 85% WGDC and DIMX on WOT because my Turbos can run 2bar+
Does anyone have an idea what can cause this behavior?
Should I maybe set DIMX to 95 in the last row ?

Thanks in advance
looks like the wastegate spring ist jumping... is he okay? Did you check it?

X-Boost Performance

Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113
« Reply #2 on: October 02, 2020, 08:22:05 PM »
Whats load doing? Seems like a load cap ride. If it hits load cap it will pull duty and then feed back causing an oscillation
Logged
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86
« Reply #3 on: October 04, 2020, 06:38:25 AM »
Wastegates are okay.

its any issue with load, but I am not sure when this starts and why this happens.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #4 on: October 04, 2020, 09:24:35 AM »
have you tuned KFVPDKS/E?

https://s4wiki.com/wiki/Tuning#Base_boost_and_wastegate_spring_pressure
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86
« Reply #5 on: October 05, 2020, 12:05:22 AM »
Yes because my Turbos has 0,5bar basespring pressure.

I read this chapter in S4 Wiki many times, because at the beginning I had issues with Throttleplate flapping on less than 0,5 bar.
I divided my new Wastegate pressure value by the old one so I got 1.5/1.3 and then I created a new table in the XDF for the X axis of KFVPDKSD and KFVPDKSE and multiplied the values by 0.15.
Logged
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86
« Reply #6 on: October 07, 2020, 03:45:55 AM »
I think I will try to increase DIMX
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6038
« Reply #7 on: October 07, 2020, 09:10:35 AM »
Read the boost PID tuning thread.
Or turn off the boost pid totally. Set CWMDAPP to 8 and set fixed duty via KFLDRAPP.

There is nothing to "tune" in KFLDRL or KFLDIMX. These maps are generated from measurements taken.
Until you understand that, better turn the boost pid off.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86
« Reply #8 on: October 07, 2020, 09:43:51 AM »
I will read PID section again.
Logged
MetalForLive
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 86
« Reply #9 on: October 08, 2020, 09:30:53 AM »
With fixed Duty cycle everything is fine.

I think I have completely start over with PID :/
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 12:51:37 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)