Hey Guys.
I had issues with a faulty 1999 Cluster Immo2 (Analog clock cluster) at first.
I couldn't find one matching my part number so i decided to Fit and Rewire my engine loom first with ME7.5 AMK S3 Engine loom.
Swap went ok, Little extending and 20 or so wires changing ect. (I have 1.8T Quattro Sport)
I made Patch harness for the cluster (unsoldered old Blue, Green and Red plugs on my clocks and Resoldering the pins)
The new clocks aren't showing RPM or Speedo.
Reasons:
Speedo sensor is 2 pin inductive sensor. (AMK is Hall effect, So Ecu/Cluster sees no speed atm) not sure how to fix this
Rev counter (Seems to be Can-bus but the Me7.5 isn't commutating with the B5 Cluster) (Been told u can put the clocks in analog mode and use pin 11 (blue plug)
Everything else on Clocks work. Just not 2 most important things
Any ideas?
Thank you.
Any help please?