A4 B7 RB8 immo3 Dash what do i need?

Pages: [1]

« previous next »

Author

Topic: A4 B7 RB8 immo3 Dash what do i need? (Read 4831 times)

Dominik89

Newbie

Karma: +0/-0
Offline

Offline

Posts: 10

	A4 B7 RB8 immo3 Dash what do i need? « on: October 24, 2020, 11:00:22 AM »

Hello
I have an 2006 a4 B7 1.8t quattro
I want to switch my dash to one with a Color Display
The Car has immo3 and Rb8 Bosch dash.
I asked a couple tuners to do this job but nobody wants to touch it.(im from germany)

What software do i need to reliably write my immo Id and vin to an other dash?
Dosent need to be newest software just has to work for my immo3 B7 audi dash.

I have a blue KKL kable and the newest VCDS
Please tell me what do i need to finally get this done.


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #1 on: October 25, 2020, 07:26:25 AM »

you won't do it with any software and kkl cable - you need at least Vag dash Can


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #2 on: October 25, 2020, 09:01:14 AM »

There is one other solution, maybe macxxx can confirm will it work.

1. You can do immo off on you ECU so car can start.
2. Then you buy from donor car cluster and working key.

You put cluster from donor to your car, and switch transponder chip from donor key to your key

On that way car will start, and no errors on dash. Only down point is you will have part workong immo. If someone try to steel your car it will have hazards warning on but engine will start


« Last Edit: October 25, 2020, 09:02:51 AM by BlackT »	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #3 on: October 25, 2020, 10:49:42 AM »

Yes it will work


	Logged

Dominik89

Newbie

Karma: +0/-0
Offline

Offline

Posts: 10

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #4 on: October 25, 2020, 04:24:13 PM »

what about CARPROG V9.31 would that work too?


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #5 on: October 25, 2020, 04:37:27 PM »

As i remember carprog reads rb4/rb8 so it should work


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #6 on: October 26, 2020, 06:11:39 AM »

dejavu tool will do it


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #7 on: October 27, 2020, 05:57:44 AM »

dejavu is pricey Wink

900 EUR


« Last Edit: October 27, 2020, 05:59:44 AM by macxxx »	Logged

Dominik89

Newbie

Karma: +0/-0
Offline

Offline

Posts: 10

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #8 on: October 28, 2020, 12:59:39 PM »

I think i will buy smok
Interface + VW0021 Bosch K-line OBD
http://smok.com.pl/index.php?id_product=76&controller=product&id_lang=2

Should be enough to switch a dash right?


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: A4 B7 RB8 immo3 Dash what do i need? « Reply #9 on: October 28, 2020, 11:59:40 PM »

Quote from: macxxx on October 27, 2020, 05:57:44 AM

dejavu is pricey Wink

900 EUR

was alot cheaper back then when i had it Shocked


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 10:48:26 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search