me7.5 motherboard wiring diagram need

Pages: [1]

« previous next »

Author

Topic: me7.5 motherboard wiring diagram need (Read 4363 times)

tao13

Sr. Member

Karma: +17/-47
Offline

Offline

Posts: 471

	me7.5 motherboard wiring diagram need « on: October 29, 2020, 11:25:06 AM »

Hi all. Somebody had a me7.5 motherboard wiring diagram need?
I burned my ecu (not feel the throttle) because i used the ground from lambda 2 sensor( this sensor is disabled) for an afr controller. After this the ecu goes up and down the rpm and after 3 starts keep the idle rpm at 2000 and acceleration pedal not feeled.
Thanks in advance


	Logged

timus

Jr. Member

Karma: +6/-0
Offline

Offline

Posts: 35

Polo 86c2f 1.8T AUM

	Re: me7.5 motherboard wiring diagram need « Reply #1 on: October 30, 2020, 03:15:39 AM »

Here: http://nefariousmotorsports.com/forum/index.php?topic=15101.0title=.
Its for two version c2-2 and c3. Maybe it will match your ecu.


	Logged

gremlin

Hero Member

Karma: +196/-9
Offline

Offline

Posts: 655

	Re: me7.5 motherboard wiring diagram need « Reply #2 on: October 30, 2020, 03:52:05 AM »

Quote from: tao13 on October 29, 2020, 11:25:06 AM

After this the ecu goes up and down the rpm and after 3 starts keep the idle rpm at 2000 and acceleration pedal not feeled.

Most likely the 80-pin ASIC chip is damaged.


	Logged

tao13

Sr. Member

Karma: +17/-47
Offline

Offline

Posts: 471

	Re: me7.5 motherboard wiring diagram need « Reply #3 on: October 31, 2020, 05:36:44 AM »

THANKS a lot to both!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 04:37:45 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search