Pages: [1]
Author Topic: ECU ME 7.5 broken?  (Read 3147 times)
Dominik89
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« on: November 22, 2020, 03:46:20 PM »

Hello
Just got a cheap ME 7.5 8e0 909 518 from ebay
Cant connect it to VCDS and boot mode dosent work.

i did connect pin 3,21,62 to +12V
1,2 to ground
and 43 k-line
Used this cable couple times without a problem.

the marked chip on the ECU is getting very Hot
its drawing 0,5Amps @ 12Volt
Is it Broken?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)