Pages: [1]
Author Topic: 038906012FK, 0281010683 - Request for A2l, XDF oder Damos File  (Read 476 times)

Karma: +0/-0
Offline Offline

Posts: 1

« on: November 29, 2020, 12:48:11 PM »

Hello @all.

I'm searching for a definition file for the EDC15VM+ V

BOSCH No.: 0 281 010 683
Typformel: EDC 15VM+ 2.V1
VW No.: 038 906 012 FK
SW Version: 352255, SG3357
Engine: 1,9l R4 EDC, ASV (110 bhp/235 Nm)
Car: Seat Leon (1M1, 10/1999 - 10/2005)
Seat Toledo (1M2, 05/1999 - 12/2003)

For the moment I'm testing the original VP37 (0 460 404 977) on a self made test stand to get the actual pump voltage map (mrwUSO_KF) and the fuel temperature compensation map (mrwKTF_KF) to compare them with the maps in the software in the EDC15VM+.
After that I'll repeat the measurements with a similar VP37 equipped with a 12 mm plunger piston instead of the original 10 mm piston. Also the size of the nozzle bores is changed from 0.184 mm to 0.260 mm.
As my first goal I want to get the two maps for the 12 mm VP37 of the software and in a second step I want to change these maps to the new values.
Now I need a definition file for the software so that I can find the fuel temperature compensation map (mrwKTF_KF). I want to use TunerPro for the tuning of the maps afterwards ecause I like open source software.
It would be very kind if somebody can give me a definition file, most preferable a XDF file.

Here is a short video with an explanation and a short demonstration of the test stand:

Kind regards,

Karma: +1/-3
Offline Offline

Posts: 22

« Reply #1 on: November 30, 2020, 01:09:08 AM »

maybe this can help you

Its an definition file in .ols format for use in winols
in this mrwKTF_KF is located at 77CD6

btw can't upload file to nefmoto Huh
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 19 queries. (Pretty URLs adds 0s, 0q)