Logging zwout - how should it look

Pages: [1]

« previous next »

Author

Topic: Logging zwout - how should it look (Read 3585 times)

ivaylopavlov

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Logging zwout - how should it look « on: December 19, 2020, 04:33:55 PM »

Hi,
1.8t here

I'm trying to find whether the logged zwout under WOT is affected by something or this is how it should look with not smoothing factor.
The ignition angle is jumping ~7,5deg to ~13,5 back and forth, is this normal behavior or should I look carefully at what could be the reason for this?
I can't see any knock on all 4cyls.

Another thing that could be seen on the log is that the mshfm_w is not equal to the msdk_w (there is some drop in the rpm range and then it tries to catch up)- WDKUGDN is not modified in any way, maybe I should, but just interested in you comments.

Thanks
Ivo


« Last Edit: December 19, 2020, 05:37:52 PM by ivaylopavlov »	Logged

ivaylopavlov

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Logging zwout - how should it look « Reply #1 on: December 21, 2020, 10:54:07 AM »

I found some topics for ARMD interventions but is it possible?
I'm running 8E0909518AL bin and i can't find any of the variables in my .ecu file in order to log the mentioned in the ARMD threads torque intervention bits.

Code:

B_lsd        
B_mifabg     
B_dashv      
B_fil        
B_mgbget     
B_zwnget     
B_zwget      
B_zwvz       
B_zwvzvb     
B_zwvs       
B_mibeg      
B_nozwe      
B_asr        
B_msr        
B_mdein      
B_llrein     
B_nmot       
mimax_w      
mivbeg_w     
mivbeb_w     
mifa_w       
misolv_w     
miszul_w     
mizsolv_w    
misol_w      
mizsol_w     
mdverf_w     
fnstab_w     
mill_w       
dmllri_w     
mdverl_w     
mistt

if anyone could help with locating them i'll be greatful.


	Logged

ottosan

Full Member

Karma: +5/-5
Offline

Offline

Posts: 91

	Re: Logging zwout - how should it look « Reply #2 on: December 30, 2020, 10:05:45 AM »

Hello,

You have the Addresses of various variables in your DAMOS file.
Open the DAM as text in notepad. Search for the variable you are looking for.
Add variables to the .ECU file you are using.

After all is done load edited file to Me7 Logger, search and select variables you wanted to log.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 19, 2024, 02:31:10 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?