Pages: [1]
Author Topic: ME 7.1.1 ESKONF  (Read 2217 times)
pukacinio
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« on: January 12, 2021, 03:33:43 PM »

Car: Audi 80 B4
Engine: 2.7 biturbo BES moded to single turbo
ECU: 4Z7907551N me 7.1.1

I want switch off:
N80
N112
N249
J299
Rear o2 sensors heater diagnosis

ESKONF is at 10C86 : 00 F0 BF FC CC 33 F0 FF AA FA FF FF 33 00

I can't understand the configuration as it is different from me 7.1

I have a Conf from w8 but it doesn't make sense to look at my ESCONF.
« Last Edit: January 12, 2021, 03:51:35 PM by pukacinio » Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #1 on: January 13, 2021, 03:05:44 AM »

http://nefariousmotorsports.com/forum/index.php?topic=8898.0

Rest you can find by trial and error
I can only confirm that rear O2 heater are on bit 5 and bit 6
Logged
pukacinio
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« Reply #2 on: January 13, 2021, 04:21:07 AM »

http://nefariousmotorsports.com/forum/index.php?topic=8898.0

Rest you can find by trial and error
I can only confirm that rear O2 heater are on bit 5 and bit 6

Thanks mate ! Maybe this will be enough  Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)