Need your help :)

Pages: [1]

« previous next »

Author

Topic: Need your help :) (Read 1649 times)

snickers228

Newbie

Karma: +0/-0
Offline

Offline

Posts: 13

	Need your help :) « on: January 26, 2021, 09:48:50 AM »

Hello guys, so i have audi 1.8t b6 auto trans,
after researches my changes are
KWNEGM 6800
KFZWOP 1/2 sub 20 three rows
KFZW 1/2 also sub 20 three rows
KFZWMN -20 three rows
KFTVSAKAT 4480,00
KFTSVA 2,5500
cwsawe 1( just tried to set it know it's for manual)
so the problem is that i get good pops and bangs when on place in neutral but I don't get any bangs when moving just a little bit burbles in exhaust slighlty noticable, what did I do wrong? or did I miss anything?


	Logged

Auriaka

Full Member

Karma: +17/-2
Offline

Offline

Posts: 113

	Re: Need your help :) « Reply #1 on: January 26, 2021, 12:03:42 PM »

On mk4 chassis vehicles I have had luck with kicking Lamfa up at low % in the rpm range I want cracks and pops... I do know there is a Lamfa axis differance between b5/mk4 and b6 chassis though. It could be something to investigate and try however.


	Logged

snickers228

Newbie

Karma: +0/-0
Offline

Offline

Posts: 13

	Re: Need your help :) « Reply #2 on: January 26, 2021, 12:13:57 PM »

Quote from: Auriaka on January 26, 2021, 12:03:42 PM

hmm.. interesting, i'll try


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 20, 2024, 01:10:06 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search