Pages: [1]
Author Topic: 8J0907115AJ 0090 Audi TT cesa  (Read 6160 times)
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« on: January 20, 2021, 09:51:36 AM »

Hello
i searching boot read this ecu
because vr file flashed and not completed not any communication try odis flash sgo not help

ecu orig 0070 but actual sw version 0090

thanks

Best regards
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 652


« Reply #1 on: January 20, 2021, 10:51:26 AM »

Hello
i searching boot read this ecu
because vr file flashed and not completed not any communication try odis flash sgo not help

ecu orig 0070 but actual sw version 0090

Read full flash in current state of your ecu in boot mode.
Extract data area from addr $10000 to $1FFFF (OTP area) as separate file.
Get VR file created from SGO file (in attach) and insert extracted part inside in overwrite mode with any hex editor.
This will be full dump suitable to write with boot tool.

 
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #2 on: January 20, 2021, 11:29:25 AM »

thank you
actually try bflash but not possible read this ecu bench mode and no boot options Sad
i asking friend other tool possible read
« Last Edit: January 20, 2021, 01:05:37 PM by sonique » Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #3 on: January 20, 2021, 03:58:52 PM »

Read full flash in current state of your ecu in boot mode.
Extract data area from addr $10000 to $1FFFF (OTP area) as separate file.
Get VR file created from SGO file (in attach) and insert extracted part inside in overwrite mode with any hex editor.
This will be full dump suitable to write with boot tool.

 

ok readed file but
this file data 00FBFE, sgo is not in
this data copy or not ?

and not need checksum ?
« Last Edit: January 20, 2021, 05:30:36 PM by sonique » Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 652


« Reply #4 on: January 21, 2021, 02:02:25 AM »

ok readed file but
this file data 00FBFE, sgo is not in
this data copy or not ?

Post here file you get from ecu.

Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #5 on: January 21, 2021, 02:46:09 AM »

Post here file you get from ecu.



its here file
only copy otp area ktag not allowed flash
maybe file not good or because not ident not start flash
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 652


« Reply #6 on: January 21, 2021, 05:05:16 AM »

Try write this one.
In boot mode ONLY!
The tool CSM correction option MUST be disabled.
« Last Edit: January 21, 2021, 05:17:23 AM by gremlin » Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 652


« Reply #7 on: January 21, 2021, 05:36:52 AM »

ok readed file but
this file data 00FBFE, sgo is not in
this data copy or not ?

Someone add own small custom code to original firmware.

Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #8 on: January 21, 2021, 08:05:45 AM »

sgo flashed before try frist flash not any patch

flashed file not start

first flash flex
after mod file ktag write file not any problem but car not see ecu

edit:
and finally working
next day test the car

thanks
« Last Edit: January 21, 2021, 03:12:42 PM by sonique » Logged
il_2evo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #9 on: December 17, 2022, 04:59:35 AM »

Hi guys!
Maybe anyone have map pack or damos for this ecu? (8j0907115aj)
 Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.032 seconds with 18 queries. (Pretty URLs adds 0s, 0q)