C:\Users\admin>C:\Users\admin\eepromtool_04.exe --status --in BBk.bin
Read in 1024bytes
Found 1024b bin - parsing as a R32 bin - experimental
ERROR: 1024byte file detected, but the last 512bytes are not all padded with 0xFF, this file is may be a corupt dump, a cluster dump or something other than an eeprom dump, open it with a hex editor - if this is a valid eeprom please post the file and vehicle info on the thread for this tool
EEPROM Status:
- Type: ECU_eeprom
- Version: Immo2
- VIN: AUZZ
8EX3A358932A
- SKC: 029971
- Immobiliser: Error, set Immo - Current values: 0x12 = 0x00, 0x22 = 0x00
- Checksum: Invalid Checksum
- Size: 1024bytes - 512bytes expected, check this is a eeprom bin
- Cluster Code: F2 FB D8 28 DA F1 00
- P0601 DTC: set to A5 A5
- Immo ID:
Z6Z0C0013300

- Softcoding ID: 0045
- Tuner Tag: Not Set
- Flash Programming (successful): 0
- Flash Programming (attempts): 0

All rectified above. did not have the correct 90P80 set when i downloaded the file doh.