TP2.0 Initialization weird response

Pages: [1]

« previous next »

Author

Topic: TP2.0 Initialization weird response (Read 4378 times)

Cadensdad14

Full Member

Karma: +8/-1
Offline

Offline

Posts: 134

	TP2.0 Initialization weird response « on: February 07, 2021, 10:37:06 PM »

*Problem found* The me7.5 ecu seems to only be running TP1.6.9

i may be out of my league here, but i have a teensy run to a mcp2515 breakout, to pins 58 and 60 on a 1.8t ecu.

im sending:
200h 7 01h C0h 00h 10h 00h 03h 01h

and im expecting:
201h 7 00h D0h 00h 03h 40h 07h 01h
or similar

but im getting back:
201h 3 14h D0h A1h

ive tried to go through the FR looking for what's going on, but my german is non existent.

Thank You for any help


« Last Edit: February 09, 2021, 12:06:01 PM by Cadensdad14 »	Logged

Cadensdad14

Full Member

Karma: +8/-1
Offline

Offline

Posts: 134

	Re: TP2.0 Initialization weird response « Reply #1 on: February 08, 2021, 02:52:36 PM »

Ive realized im having an issue with my RTR bit and setting it in my system. I thinking I'm sending yhe wrong one and getting something like an ack response and not the right response


	Logged

Cadensdad14

Full Member

Karma: +8/-1
Offline

Offline

Posts: 134

	Re: TP2.0 Initialization weird response « Reply #2 on: February 08, 2021, 06:57:07 PM »

so 0x14 appears to be a responseTooLong code.

This response code shall be reported by the server if the response to be generated exceeds the maximum number of bytes available by the underlying network layer.

Still stuck but trying


	Logged

seishuku

Full Member

Karma: +13/-0
Offline

Offline

Posts: 131

	Re: TP2.0 Initialization weird response « Reply #3 on: February 14, 2021, 10:53:11 AM »

I get an identical response on my 018CM ME7.5 ECU, I would guess that over the CAN bus it doesn't fully support a KWP2k diagnostic session like it does over K-line.

I'm actually surprised that it responds at all, I would have at least expected a negative response instead of "responseTooLong".

But as far as I knew, the CAN on the ECU and other modules in this era is only for internal data transfer, and just doesn't support a diagnostic session via KWP.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 09:24:43 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search