Pages: [1]
Author Topic: C6/B7 6HP19A gearbox to C5 5HP19 swap  (Read 2511 times)
BlackT
Hero Member
*****

Karma: +46/-26
Offline Offline

Posts: 935



« on: February 22, 2021, 12:09:50 PM »

I am planing to upgrade 5hp19 gearbox to 6hp19 in audi C5 2.7 TT.
As I seen on forum M7.1.1 2.7TT can be paired with 6hp TCU.
And looking to shematic TCU only need power and canbus to work. Also I see that C6 have samo immo in TCU so I am planing to get everything from late B6 or B7.
Diff gear ratio as far I can see are same on 3.2 FSI C6 and C5 2.7 TT. So I can leave rear diff from C5 on car.

Is this is possible swap to get everything work?
Logged
BlackT
Hero Member
*****

Karma: +46/-26
Offline Offline

Posts: 935



« Reply #1 on: February 26, 2021, 04:02:41 AM »

I can easily found gearbox from B7 2.7 TDI or 3.0 TDI.
From 3.2 FSI is imposible to find
Now I have two questions:
1. Can gearbox from TDI communicate with petrol ECU?
2. Is it possible to flash TDI gearbox with 3.2 FSI sofware?
Logged
dus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: March 11, 2021, 09:20:22 PM »

gear rations 3.2 a4b7 box match to 2.0 tfsi a4b7 box witch is understanding turbo load. 2tfsi box is better. or try crossflash 3.2 to 2.0tfsi. I use gearbox, flywheel and torque converter from 3.0 mpi a6c6 but not yet driven with boost. a6c6 2.7t swap.
Logged
BlackT
Hero Member
*****

Karma: +46/-26
Offline Offline

Posts: 935



« Reply #3 on: March 11, 2021, 10:25:03 PM »

I can get 2.0TFSI gearbox from B7, but will it match with 2.7TT ECU?

gear rations 3.2 a4b7 box match to 2.0 tfsi a4b7 box witch is understanding turbo load. 2tfsi box is better. or try crossflash 3.2 to 2.0tfsi. I use gearbox, flywheel and torque converter from   3.0 mpi a6c6   but not yet driven with boost. a6c6 2.7t swap.
C6 3.0 MPI?  I didn't see that?
Logged
macxxx
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 419


« Reply #4 on: March 13, 2021, 07:12:25 AM »

There is no 3.0mpi in c6
Logged
dus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #5 on: March 13, 2021, 10:00:27 PM »

this exists on the Russian market

Logged
dus
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #6 on: March 13, 2021, 10:08:06 PM »

I can get 2.0TFSI gearbox from B7, but will it match with 2.7TT ECU?

need to try. there is no answer now. the 2.7 turbo ecu works with 6hp19 from NA 3.0, the car drives, but there are problems with not understanding the load of the gearbox. see Stoti thread http://nefariousmotorsports.com/forum/index.php?topic=17945.0
Logged
macxxx
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 419


« Reply #7 on: March 14, 2021, 12:08:19 AM »

this exists on the Russian market


Forgot that there are diffrent markets Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)