Just my 2c:
022906032DR file equipped with DSG
we had misfires at cyl1 and constant pwm even after shutoff after transfering routine from example file, all variables was fine, mono lambda patch also here, there is no load limit in this file
- all ram variables redefined to 387* instead of 384* this eliminate misfires, even if IDA shows empty space here, probably some ram-mirroring was there, ive faced this before so just swap it with 387xxx*
- changed turbo routine instead of feeding pwm it manages new ldtvm_w to be able to log wgdc and move pwm to its raster
- new code (below) with port writing hooks up with other pwm operations, i believe its 1ms raster, correctly operating pwm even with !b_kl
exts #38h, #1
mov r4, ldtvm_w
movbz r5, rl4
shl r5, #8
mov r4, PP3
mulu r5, r4
mov PW3, MDH
mov r2, MDH
DPUPVDK calculates pvdkds_w based on ml_w in stock its subtracted map values from pu_w and i replaced it with addition due to map is not signed, this gives positive pvdkds_w and msdk_w now looking nice but i still thinking to replace it with native map sensor
RLVMXN/RLVSMXN maxed out to eliminate IOP limit and gives adequate misol_w, now its misol > miist, no torque intervention and car runs smoothly, ps_w, msdk_w, pvdks_w finally sorted out
asm patch for b_mdee (redsol) when shifting, basically some kind of 'jb b_zwget, loc_enable' so it gets selective fuel cut at shifts but unfortunately without noticeable sound
this knowledge costs me 2 days so enjoy it for free
probably i want to emulate KFVPDKDS / KFPLGU stuff but im not sure for now // any hints?
