Pages: 1 [2]
Author Topic: Custom C167 Boost PID  (Read 21572 times)
IamwhoIam
Hero Member
*****

Karma: +49/-105
Offline Offline

Posts: 1059


« Reply #15 on: April 02, 2023, 04:49:25 AM »

pjr=PyJamaRama
Logged

I have no logs because I have a boost gauge (makes things easier)
fknbrkn
Hero Member
*****

Karma: +177/-20
Offline Offline

Posts: 1417


mk4 1.8T AUM


« Reply #16 on: July 08, 2024, 05:57:58 AM »

Quick question
Im in my way into R32T w 022906032DR
And pw1 used here for exhaust cam / pw0 for intake one
So maybe someone wants to save me a day of digging into code / logs  Wink
Logged
prj
Hero Member
*****

Karma: +1054/-443
Offline Offline

Posts: 5905


« Reply #17 on: July 08, 2024, 06:51:01 AM »

There is usually PWM output for intake flap changeover. Or is it solved with an on/off on it?
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1280



« Reply #18 on: July 08, 2024, 11:46:05 AM »

Quick question
Im in my way into R32T w 022906032DR
And pw1 used here for exhaust cam / pw0 for intake one
So maybe someone wants to save me a day of digging into code / logs  Wink


Yes. Use pw3 its free.

Thats what i did both on st10 and c167

Be aware you need configure the period register aswell.
Logged
fknbrkn
Hero Member
*****

Karma: +177/-20
Offline Offline

Posts: 1417


mk4 1.8T AUM


« Reply #19 on: July 08, 2024, 01:55:16 PM »

There is usually PWM output for intake flap changeover. Or is it solved with an on/off on it?

Seems that its only binary condition in this ECU

Quote
Yes. Use pw3 its free.

Thats what i did both on st10 and c167

Be aware you need configure the period register aswell.

Yep its free
At the 1.8t it seems that PW3 used for TEV with output to pin 64, can you confirm its the same pin?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1280



« Reply #20 on: July 09, 2024, 05:29:46 PM »

Seems that its only binary condition in this ECU

Yep its free
At the 1.8t it seems that PW3 used for TEV with output to pin 64, can you confirm its the same pin?

No its on pin 116 if I remember correctly. Positive is on 121 usually.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)