Audi TT Mk1 Bench Key Programming

Pages: [1]

« previous next »

Author

Topic: Audi TT Mk1 Bench Key Programming (Read 2398 times)

JakeGT

Newbie

Karma: +0/-1
Offline

Offline

Posts: 21

	Audi TT Mk1 Bench Key Programming « on: March 27, 2021, 08:34:50 AM »

Hi,

Does anyone know if I need anything else connected on the bench to allow me to adapt new keys?

Currently have cluster, ECU & key all matched & wired up. Whenever I try to adapt a new key in VCDS I get an error on Channel 21. I've followed the process correctly but can't figure it out Huh

Any help appreciated. Thanks.


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: Audi TT Mk1 Bench Key Programming « Reply #1 on: March 27, 2021, 11:35:47 PM »

Do you have correct pins? Is there communication beetween cluster and ecu? ( can and W wire )


	Logged

BlackT

Hero Member

Karma: +79/-39
Offline

Offline

Posts: 1420

	Re: Audi TT Mk1 Bench Key Programming « Reply #2 on: March 28, 2021, 12:09:49 AM »

If it is a immo 3, than you need a new keys, or put new ID48 chip in old keys.

You can use old keys, but only with pin from that car


	Logged

stuydub

Full Member

Karma: +24/-12
Offline

Offline

Posts: 229

	Re: Audi TT Mk1 Bench Key Programming « Reply #3 on: March 28, 2021, 03:08:30 AM »

Quote from: JakeGT on March 27, 2021, 08:34:50 AM

Any help appreciated. Thanks.

to adapt keys on bench obvs need ECU and CLUSTER rig connected/joined (this setup pairs ecu /cluster/keys)..u you need the chip reader ring from barrel connected to ECU and cluster (i dont have CAN wires connected for edc 15 me7)..immo 3 u need SKC for old keys or new id48 chip (as stated above) or u can use a immo2 key as these are unlocked untill paired to immo 3..


« Last Edit: March 28, 2021, 03:11:02 AM by stuydub »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 23, 2024, 05:42:19 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search