Pages: [1]
Author Topic: 2.7T Hitachi to Bosch RS4  (Read 1741 times)
hurray
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: April 03, 2021, 09:19:27 AM »

Hello, i bought an a6 2.7t 230ps and tiptronic. The seller did some Strange Things in the ecu so i dont have a Stock File and He Putted an RS4 maf in it and didnt Change MLHFM. I have a Lot of Problems With the engine so i wanted to flash a Stock s4 bin 8d0907551L.bin i Already Changed mlofs to 200 and copied MLHFM From a my Car Into it. But i dont Know If the values are right because Hitachi goes linear Up and Bosch Up and down See attachments. I would Like to Know If thats right before i Change every value to the bigger diameter
« Last Edit: April 03, 2021, 09:20:58 AM by hurray » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: April 03, 2021, 04:28:29 PM »

jesus dude how about posting an actual screenshot and not a photo of your screen

And no, thats not even remotely right
« Last Edit: April 03, 2021, 04:30:05 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)