Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
Pages: [
1
]
« previous
next »
Author
Topic: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT (Read 2731 times)
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« on: April 04, 2021, 07:25:33 PM »
Are the pinouts of M7.1.1 and M7.1 same on 2.7BiT?
Can I use ARE M7.1 ECU on BEL engine (M7.1.1)?
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« Reply #1 on: April 04, 2021, 07:35:08 PM »
no
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Re: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« Reply #2 on: April 05, 2021, 01:26:56 PM »
Quote from: nyet on April 04, 2021, 07:35:08 PM
no
Main difference is?
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« Reply #3 on: April 05, 2021, 01:32:47 PM »
Pinouts are different, integrated ICM vs external ICM, rpm sensor, accel pedal, cluster etc.
I don't have a full list handy; no point, really, easier to just get the right harness to go with your ecu, or, more sanely, the right ecu for your harness.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Re: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« Reply #4 on: April 21, 2021, 01:10:00 PM »
Strange there is no shematic in elsa or auto data. Is the pinout for bench same?
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« Reply #5 on: April 21, 2021, 04:48:52 PM »
Quote from: BlackT on April 21, 2021, 01:10:00 PM
Strange there is no shematic in elsa or auto data. Is the pinout for bench same?
Yes, I believe the bench pinout is the same, though you may need an additional vcc or gnd for 7.1.1 but i dont recall specifics.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BlackT
Hero Member
Karma: +79/-40
Offline
Posts: 1425
Re: Can I use M7.1 ECU on car with M7.1.1. 2.7BiT
« Reply #6 on: April 22, 2021, 02:37:32 AM »
This shematic from attachment is good, also boot mode was not possible grounding pin 24 on 2F800. But grounding pads next to pin 104 on C167, did work. Is that was yust a luck I don't know, but I am glad I manage to do it
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 23, 2024, 05:45:20 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
