Pages: [1]
Author Topic: what is the measurement for this?  (Read 1902 times)
03GTI
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« on: April 06, 2021, 05:31:42 PM »

is this in mbar? or kpa? I'm pretty sure kpa cause if i convert that to psi from mbar i get 1psi lol but its 20psi converted from kpa. sorry for the noob question just trying to make sure i dont blow my car up with over boost.
Logged
03GTI
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #1 on: April 06, 2021, 05:33:56 PM »

sorry here is the picture.
Logged
justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 191


« Reply #2 on: April 06, 2021, 05:51:08 PM »

It isn’t either. The wiki outlines some calculations to give a rough estimate, but it just a rough estimate. Only thing to do is get a setup that will run ME7 logger. Then add say 5% or so then log and see the result. Try something, log, read data, repeat.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: April 06, 2021, 09:42:40 PM »

https://s4wiki.com/wiki/Load
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)